Owner's Manual

Appendix B: MIDI
B•4
The following describes the automatic MIDI messages sent when these POD HD500
controls are accessed when using specic gestures.
SAVE
HOLD FOR SYSTEM & I/O
VIEW
P
R
E
S
E
T
S
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
PRESETS Knob
ENTER Button
4-Way Nav. Disc
Arrow Buttons
POD HD500 Controls that transmit Bank & Program Changes
• Turning the PRESETS Knob: Internally on POD HD500, turning clockwise and
counter-clockwise increments & decrements through Presets in the current Set List.
These actions also send the following MIDI messages:
• Clockwise turn: Transmits a Program Change - Increment message.
• Counter - clockwise turn: Transmits a Program Change - Decrement message.
• Press Footswitches A, B, C & D: Internally this selects the respective Preset within
the current Bank. These switches also transmit MIDI Program Change - Fixed
messages, with Values from 0 to 64. The specic value is determined by the current
Bank (e.g. - for Bank 1 these four footswitches send Values 0 - 3, for Bank 2 they
send Values 4 - 7, etc.)
• Press PRESETS Knob > Press Nav. Disc Arrow Button > Press Enter Button:
Internally, this sequence calls up the Set Lists screen, selects a Set List (1 - 8)
and loads the Set List. This sequence also transmits a MIDI Bank Change - Fixed
message, with a Value of 0 through 7, respectively, when selecting Set List 1 - 8.