Owner's Manual
Features & Functionality
3•9
The Controller Assign screen is then displayed specically for the selected Model. In our
example, it is the Digital Delay W/Modulation. Use the Multi-function Knobs 1-4 to
congure the controller assignment options.
The Controller Assign screen
• Parameter (Knob 1): Select the parameter for the current Model that you want to
control.* In our example, we’ll choose the Mix parameter.
• Controller (Knob 2): Select the controller that you want to assign to the parameter.
Choose Off to have no assignment, or choose EXP 1, EXP 2, Variax Vol or Variax
Tone.
• Minimum Value (Knob 3): Set the parameter value you’d like for the Pedal’s “heel”
or Knob’s minimum position.
• Maximum Value (Knob 4): Set the parameter value you’d like for the Pedal’s “toe”
or Knob’s minimum position.
* Note: As stated on page 3•7, when adding any Wah or Volume/Pan FX Model to your
tone, their Position parameters are automatically assigned to the EXP 1 & EXP 2. These
Wah & Volume/Pan EXP assignments will remain in addition to other parameters you
assign, resulting in your Pedal controlling multiple parameters. Be sure to remove any
unwanted Model’s EXP assignment in the Controller Assign screen.