Owner's Manual

Features & Functionality
3•12
Use Multi-function Knob 1 to select the footswitch to which you want this FX Block
assigned - choose FS1 through FS8, the EXP Toe Switch, or None to remove the Block’s
assignment. The following behaviors apply:
• If a footswitch already has an FX or Amp block assigned: The existing Block remains
assigned, and selecting this footswitch additionally assigns your new Block. When
referencing the Performance View, you’ll see the footswitch display a “Multi” graphic
to indicate this. You can congure 2 or more parameters to the same footswitch to
toggle them On/Off simultaneously - or, have one toggle On while another Toggles
Off!
Indicates multiple Blocks assigned to a footswitch
TIP: To reference current footswitch assignments, when in the Footswitch Assign screen,
use the Nav. Disc buttons to select each Block, and look at the Knob 1 setting for each
at the bottom of the screen.
• When a footswitch has no Block assigned: You’ll see the N/A graphic displayed in
the Performance View for the respective footswitch.
Indicates no Blocks assigned to a footswitch