Owner's Manual

Working with Presets
4•5
Bank & Channel Footswitches
Preset selection is completely “hands-free” by way of the Bank Up , Bank Down and
Channel A, B, C, D (FS5 - FS8) Footswitches. Note that you’ll need to set the System - FS
Mode setting to “ABCD” to allow FS5 - FS8 to instantly access the Channel locations -
see “Page 1, Setup:Utilities Options” on page 2•2.
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
SAVE
HOLD FOR SYSTEM & I/O
VIEW
P
R
E
S
E
T
S
Bank Up & Down Channel A,B,C,D footswitches (FS5 - FS8)
• Press the A, B, C or D switch to instantly recall its Channel location within the
currently selected Bank.
• To navigate through Banks, press the Bank Up or Bank Down footswitch and you’ll
see the Queued Bank screen displayed, with the current Bank/Channel ashing:
The Queued Bank screen - the next Bank is queued
• Continue pressing the Bank Down or Bank Up footswitch and you’ll see the previous/
next Bank’s A, B, C & D Channels & their Presets “queued,” as shown above. Then
press the A, B, C or D footswitch to load the respective Preset from the desired Bank.