Owner's Manual
Overview
1•2
At the bottom of the Signal Flow View screen, you’ll see up to four parameters that are
accessed using the Multi-function knobs 1-4.
Accessing parameters with the Multi-select Knobs
These parameters are specic to the currently selected Block and allow you to choose new
Models & edit parameters. Or, you can dive deeper in the Edit Mode and access additional
settings in other screens, as covered in the following chapters.
Performance View
The Performance View screen displays the FX and/or Presets that are currently assigned
to your POD HD500 footswitches. Footswitches FS5 - FS8 can be congured to either
toggle FX On/Off, or to select Preset channels (see “Page 1, Setup:Utilities Options” on
page 2•2).
FX assignment for FS1-FS8 ABCD assignment for FS5-FS8
These FX assignments for FS1 - FS8 can be edited for each Preset (see “FX & Amp Block
Footswitch Assignment” on page 3•10). When the Looper is active, the Performance
View screen displays a set of Looper functions (see “Looper Mode” on page 8•1).