Owner's Manual

Amp, Cab & Mic Models
6•9
Note that the VOLUME knob does not control the level at all for a “Null” Amp Block.
• Use the Multi-Function knobs 1 - 4 to adjust the options at the bottom of the screen:
• Knob 1: Select the desired Amp or Preamp Model.
• Knob 2: Select the desired Cab Model (also see the Page 4 options).
• Knob 3: Select the desired Mic Model (also see the Page 4 options).
• Knob 4: Choose between adjusting controls for Amp A or Amp B. (This option
is available on all AMP EDIT screens.)
Amp Edit - Page 2
Page 2 offers three options that affect the power amp characteristics of your Amp Model.
Page 2 of the Amp:Edit Screen (not displayed for Preamp Models)
• Knob 1: Use this Master Volume to adjust the amount of power amp distortion. This
parameter is highly interactive with all other power amp parameters - the lower the
Master is set, the less effect the other controls will have.
• Knob 2: Setting the Sag to minimum offers a “tighter” responsiveness, and turning
clockwise provides more “touch” dynamics & sustain.
• Knob 3: Controls how much heater hum & AC ripple interacts with your tone. At
the maximum setting things get really freaky.