Owner's Manual
Amp, Cab & Mic Models
6•11
Note: If you selected “No Cab” for your Cab Model, these Mic and Early Reflections
settings will perform no function since no Speaker, Mic or Early Reflections processing is
applied.
• Knob 1: Sets the amount of “early reections.” Higher values add more reective
room sound to your Amp tone.
• Knob 2: Applies low frequency attenuation - helpful to tighten up the low end of
your tone.
• Knob 3: Selects the Mic type (see the Mic Model table on page 6•6).
Note: If you select the 1x15 Flip Top Bass Cab Model, you’ll see a unique set of Mic Models
in this list, best suited for Bass.
Amp Edit - Page 5
Here you’ll nd even further “deep-editing” parameters for the Speaker Cab, allowing you
to surgically rene the the feel and frequency response to your personal taste.
• Knob 1: Adjusts the overall level of the modeled speaker Resonance, which results
in a more “lively,” brighter response on higher settings. Increasing the Resonance
Level will cause the overall volume to increase as well.
• Knob 2: Adjusts the low frequency level of the modeled speaker resonance. Just as
the name implies, increasing the value on this knob adds more low end “Thump” to
the Cab tone.