Owner's Manual

FX Models
7•11
Common Parameters
The following parameters are common to most Delay FX Models.
• Time: Adjusts the delay/repeat time, with higher settings providing longer delays.
Time can be adjusted to a MS value or Note Division:
• Choosing a MS value provides a specic time in milliseconds.
• Choosing a Note Division value provides a time that is based on the current Tap
Tempo (see “Tap Tempo” on page 1•4).
• Fdbk (Feedback): Sets the number of delayed repeats.
• Depth: Some delays include modulation. These will typically include a Depth
parameter to adjust the intensity of the pitch modulation applied to the repeats.
• ModSpd: Control the speed of the pitch modulation.
• Mix: Sets the balance of the “Dry” and “Wet” signals. At 0% no effect is added to
your signal; at 100% you will hear the delayed signal only.
Reverb Models
Reverb Models - Parameter Reference Table
Model Parameters
Plate Decay PreDelay Tone Mix
Room Decay PreDelay Tone Mix
Chamber Decay PreDelay Tone Mix
Hall Decay PreDelay Tone Mix
Echo Decay PreDelay Tone Mix
Tile Decay PreDelay Tone Mix
Cave Decay PreDelay Tone Mix
Ducking Decay PreDelay Tone Mix
Octo Decay PreDelay Tone Mix
Spring Decay PreDelay Tone Mix
‘63 Spring Decay PreDelay Tone Mix
Particle Verb Dwell Condition Gain Mix