Owner's Manual

Using the Looper
8•5
Looper Settings
Press the VIEW button to display the Signal Flow View screen and select the Looper to
access several additional settings.
The Signal Flow View screen, Looper options
• 1 Playback - Use Multi-function Knob 1 to adjust the Looper playback volume. You
may nd it useful to turn this down a bit so that your live guitar can be slightly
louder.
• 2 Overdub - Use Multi-function Knob 2 to adjust the level at which all Overdubs are
recorded. This level does not affect the level of your original Loop recording.
• 3 Hi Cut & 4 Lo Cut - Use Multi-function Knobs 3 & 4 to adjust these EQ options,
to reduce the treble and bass of your Loop playback. It can be helpful to reduce these
to optimize the “mix” of your Loop playback with your live guitar. These controls
reduce the High and Low frequencies more as you raise their values.
1/2 Speed Operation
The Looper utilizes both the 1/2 Speed and Full Speed options for recording and playback.
These options directly affect the maximum Loop recording time.
POD HD500 Looper Record Time
Full Speed 24 Seconds maximum
1/2 Speed 48 Seconds maximum