Quick Start Manual

ConguringtheEXP 1 & EXP 2 parameter assignments is done within
the
Controller Assignscreen.ToaccesstheControllerAssignscreen,go
totheSignalFlowViewandselecttheAmporFXBlockforwhichyou’d
liketocreateanExpressionPedalassignment.SelectthedesiredFXblock,
then double-press the
MOVE button. TheControllerAssignscreenisthen
displayed specically for the Amp or FX Model currently loaded in the
selectedBlock.UsetheMulti-functionKnobs1-4tocongurethePedal
assignmentsoptionsspecicallyforthisFXModel.
Knob 1 -Selectsthe
parameter for the current Model that youwanttocontrol with an Exp.
Knob 2 -Selectsthecontrollerthatyouwanttoassigntotheparameter.
Choose
Off to have no Pedal assignment, or choose EXP 1 or EXP 2. Knob
3 -Setstheparametervalueyou’dlikeforthePedal’s“heel”position.Knob
4 -Setstheparametervalueyou’dlikeforthePedal’s“toe”position.
Assigning an FX or Amp Block to a Footswitch
FS1 through FS8footswitches,aswellastheExpPedal’s“toeswitch”canbe
conguredtotoggleanyoftheFXorAmpBlocksOn/Off.Fromwithinthe
SignalFlowscreen,selecttheFXorAmpBlockwhichyouwantassigned
to one of your footswitches. Then Press and hold the
ENTER button to dis-
playtheFootswitchAssignscreen.TheFootswitchAssignpageisdisplays
similartoyourSignalFlowview.UseMulti-function
Knob 1 to select the
footswitchtowhichyouwantthisFXBlockassigned.
Note: you can assign
multipleFXBlockstoasinglefootswitchorExpPedal's"toeswitch".You
canreferencethecurrentPreset’sFXfootswitchassignmentsbypressingthe
VIEW button to display the Performance View screen.
seT lisTs
PODHD500storesup64Presetswithineachofits8SetLists.Thebigidea
hereisthatyoucanloadanyoneoftheseSetListstothengainaccessto
any of its Preset locations.
From any screen, simply push the
PRESETS knob to display the Set Lists
screen.
Load a Set List:Usethe4 Way Nav, or turn the PRESETS knob to select
anySetList, thenpressthe
ENTER button. This immediately loads the
selectedSetList,makingallitsPresetsavailable.Notethatyourpreviously
loaded Preset is automatically closed, and the Preset of the same Bank/
ChannellocationnumberfromthenewSetListisloaded.
Rename a Set List:WiththedesiredSetListselected,pressthe SAVE
button to display the
Rename Set Listscreen.Toeditthename,useMulti-
functionKnob3toselectthedesiredcharacter,thenuseKnob4toeditthe
character. Once complete, press
SAVE again to commit your new name.
Editing a Set List:WhileintheSetListsscreen,double-presstheENTER