Quick Start Manual

buttontodisplaythelistofPresetsinthecurrentSetList,whereyoucan
referenceeachPreset’sBank/Channellocation,loadaPreset,orrearrange
thePresetsintoinanyorderyoulike.Usethe
4 Way Nav Pad, or turn the
PRESETSknobtoselectanyofthe64locations.PresstheENTER button
toimmediatelyloadtheselectedlocation’sPreset.Pressthe
MOVE button
and use the
4 Way Nav Pad to move a selected Preset to a new location,
press
MOVE again to place it. Once you've completed all of your changes,
press the
Presets knob to commit your changes.
Working WiTH PreseTs
Eachofthe8SetListswithinPODHD500includes64Channellocations
forholdingPresets.EachPresetincludesallcurrentFX&Ampsinuse,all
their parameters, their position within the signal flow, footswitch & pedal
assignments,Mixersettings,aswellasinputoptionsandotherSetupop-
tions,asindicatedthroughoutthisGuide.
Accessing Presets: FromanyoftheHomeViewscreens,simplyturnthe
PRESETSknobtoincrementthroughall64locationswithinthecurrently
listedSetListandimmediatelyloadthedesiredPreset.Alternatively,you
canaccessPresetsthatresidewithinanySetListfromwithintheSetList
- Preset screen.
Bank & Channel Footswitches:PODHD500alsooffersPresetselection
completely “hands-free” by way of the Bank Up
 , Bank Down
and Channel
A, B, C, D (FS5 - FS8)Footswitches.Notethatyou’llneed
to set the
System - FS Mode setting to “ABCD” to allow FS5 - FS8 to
instantly access the Channel locations. Press the
A, B, C or D switch to
instantly recall its Channel location within the currently selected Bank.
NavigatethroughBanksbypressingtheBankUp
andBankDown
footswitchandyou’llseetheQueuedBankscreendisplayed.Thenpressthe
A, B, C or D footswitch to load the respective Preset from the desired Bank.
Saving Presets: To retain any new changes made to a Preset, or if you want
torenameor move thecurrentPreset toadifferentSet Listand/ornew
Channellocation,youcanusetheSavefunction.ToinitiatetheSavefunc-
tion, press the
SAVEbuttontodisplaytheSavePresetscreen.
UsetheMulti-functionKnobs1-4tochooseyourSavefunctions.Set List
(Knob 1): Choose any one ofyour8SetListshereinwhichyou’dlike
tosaveyourPreset. By default, you’llseeyourcurrently loaded Set List.
Destination (Knob 2):ChoosethespecicBank/Channellocationwithin
theselectedSetListtosaveyourPreset.
Note that this will permanently
overwrite the Preset within the destination location once you commit
the save.Chooseanemptylocationifyoudon’twishtoreplaceanexisting
Preset.
Cursor & Character (Knobs 3 & 4): To rename your Preset, select
acharacterwithKnob3,thenuseKnob4toedittheselectedcharacter.
Onceyou’vecompletedtheabovesettings,pressthe
SAVE button to com-
mit. Or, to cancel the save, press the
PRESETS knob or VIEW button.
sYsTem seTuP
ToaccesstheSystemSetupoptions,pressandhold the VIEWbutton.Here
youcancongureseveraldevice functions,Input& Outputsettingsand
more.TherearemultipleSetuppagesavailable.Usethe
4 Way Nav Pad
to navigate to the desired screen. On each page, up to four options on the
lower portion of the screen can be adjusted using the
Multi-Function Knobs.