Quick Start Manual

1. Display - TheLCDisyourwindowintothepowerofthePODHD500.
Home Pages -arethedefaultviewonyourPOD.Thereare3user-
selectable views for the
Home Page.
Selected
Sélection
Ausgewählte
Geselecteerd
Seleccionados
選択
The Signal Flow View shows you all the amp and effects model
"blocks" in your signal chain. From this view you can edit or move
anycomponentaffectingyourtoneinthesignalpath.Usethe
4 Way
Nav Pad toselectanAmp,FX,orLooperblock.Atthebottomofthe
SignalFlowViewscreen,aswellasinmostotherscreens,you’llseeup
to four parameters that are accessed using the
Multi-Function Knobs -
theseparametersarespecictothecurrentlyselectedBlock
.
Press the VIEW button to switch focus to the Performance View. This
screendisplaystheFXand/orPresetsthatarecurrentlyassignedtoyour
PODHD500footswitches
FS1 through FS8. Footswitches FS4 - FS8
canbeconguredtoeithertoggleFXBlocks4-8On/Off,orprovide
instant access to the
A, B, C, D Preset channels within the current
BankviatheSetupPages(PressandHoldthe
HOME button to access
SystemPages).
Press the VIEW button once more to show the Big User View, which
shows you the bank and channel number where the current preset is
stored.
Edit Pages - These pages show all parameters available to tweak for a
processingblockorsystemsetuppage.FromtheSignalFlowView,you
can double press
ENTER to access an edit page for the current selection
block.Seetheadvancedguideavailableonlineformoreinformation.
2. Presets Knob / Set Lists Button - Turn this knob to select through all
of the stored presets. Presets are saved in groups called
Set Lists making
it easytokeepdifferentpresetsgroupedforspecicapplications. To
load a new
Set List, press the Set Lists button and use the 4-Way Nav
to highlight a
Set List.HighlightingaSet List provides options for
loading and re-naming
Set Lists, as well as re-ordering the presets
stored within the
Set List. NOTE:Whenre-orderingpresetsyoumust
press the
Set Lists button in order to save any changes.
3. Save Button - Press this button to save changes to a factory preset or
your very own custom creations – every preset location is available to
beoverwritten.Usethe
Multi-Function knobs to rename the preset