Quick Start Manual

1. Display - The LCD is your window into the power of the POD

HD500X.

Home Pages - are the default view on your POD. There are 3 user-

selectable views for the Home Page.

Selected

Sélection

Ausgewählte

Geselecteerd

Seleccionados

選択

The Signal Flow Viewshows youall the amp and eects model

"blocks" in your signal chain. From this view you can edit or move

anycomponentaectingyourtoneinthesignalpath.Usethe4 Way

Nav Pad to select an Amp, FX, or Looper block. At the bottom of the

Signal Flow View screen, as well as in most other screens, you’ll see

up to four parameters that are accessed using the Multi-Function

Knobs - these parameters are specic to the currently selected

Block.

Press the VIEW button to switch focus to the Performance View.

ThisscreendisplaystheFXand/orPresetsthatarecurrentlyassigned

to your POD HD500X footswitches FS1 through FS8. Footswitches

FS4 - FS8canbeconguredtoeithertoggleFXBlocks4-8On/O,

or provide instant access to the A, B, C, D Preset channels within the

current Bank via the Setup Pages (Press and Hold the HOME button

to access System Pages).

Press the VIEW button once more to show the Big User View,

which shows you the bank and channel number where the current

preset is stored.

Edit Pages - These pages show all parameters available to tweak

for a processing block or system setup page. From the Signal Flow

View, you can double press ENTER to access an edit page for the

current selection block. See the advanced guide available online for

more information.

2. Presets Knob / Set Lists Button - Turn this knob to select through

all of the stored presets. Presets are saved in groups called Set

Lists makingiteasytokeepdierentpresetsgroupedforspecic

applications. To load a new Set List, press the Set Lists button and

use the 4-Way Nav to highlight a Set List. Highlighting a Set List

provides options for loading and re-naming Set Lists, as well as

re-ordering the presets stored within the Set List. NOTE: When re-

ordering presets you must press the Set Lists button in order to save

any changes.