® Version 2 - Advanced User Guide Getting Started With Your Hardware GX UX1 DI UX2 KB37 Guitar Port POD X3 Family UX8 PODXT Family POD Farm™ 2 Basics iLok POD Farm 2 Plug-In Elements Plug-Ins Standalone Operation Online Resources POD Farm Online Support Line 6 Online Store
Table of Contents Start Here.................................................................................................1•1 About Line 6 Hardware & Software............................................................................... 1•1 System Requirements - POD Farm 2 Plug-In & Standalone Operation........................ 1•1 Updating & Registering with Line 6 Monkey™............................................................. 1•2 Product Activation & Authorization.................................
2 - Panel View Display..................................................................................................... 4•8 Gear View........................................................................................................................ 4•9 Panel View..................................................................................................................... 4•10 Presets View.........................................................................................................
POD Farm 2 Advanced User Guide – Start Here Start Here About Line 6 Hardware & Software OK, you’ve got your guitar, a computer and a head full of songs and cool licks, so how do you get this all going? You’re just a few steps away from turning your computer into a serious tone, jamming and recording machine. First, here is some valuable information on getting started, and to ensure you have all the latest and greatest updates.
POD Farm 2 Advanced User Guide – Start Here Windows® 64 Bit support If you have a 64 bit Windows® PC, then no worries! The POD Farm 2 application, Plug-Ins and the included Line 6 USB hardware drivers do indeed support Windows® 64-Bit systems. Note that POD Farm 2 (as well as the POD Farm 2 & Elements Plug-Ins) still runs as a 32 bit application, but has been made compatible to run on these Windows® 64 bit operating systems.
POD Farm 2 Advanced User Guide – Start Here Register Your Hardware If you have not already done so, you’ll be prompted to Register your connected Line 6 hardware. Registration may be required to obtain some updates and/or to activate some Line 6 products for use with your computer. It’s a painless process really, so click that Register Now button and fill in the blanks on the Web page. Grab Those Updates Go to the Updates tab in Line 6 Monkey.
POD Farm 2 Advanced User Guide – Start Here If you’ve purchased additional Add-Ons for your Line 6 device, you will have received a License Key for each Add-On purchase transaction directly from Line 6. Launch Line 6 Monkey, go to the Optional Add-Ons tab, and then follow these steps: • You can find your Add-On purchase license key by logging into the Line 6 - My Account online page, and looking in the License Keys page (you can keep the Line 6 Monkey application window open while you go to the web site).
POD Farm 2 Advanced User Guide – Start Here Remember the following about your Line 6 hardware that now holds your POD Farm 2 license: • For POD Farm 2 & Elements Plug-In operation, your Line 6 hardware must always be connected via USB (even if you’re using a 3rd-party audio interface). You don’t necessarily need to be using your Line 6 hardware as your active USB audio device - it just needs to be USB-connected (and powered on for units that have a power switch).
POD Farm 2 Advanced User Guide – Start Here Prerequisite - This may seem obvious but we’ll mention it anyway: Your hardware and all POD Farm 2 software and Add-ons must already be activated and authorized on your own computer (meaning, an Internet connection is required and has been used for the initial activation of your POD Farm 2 assets). On your computer: • Locate and copy all .aet files to removable media (burn to a CD, copy to a Flash drive, etc.).
POD Farm 2 Advanced User Guide – Start Here • If you decide to sell your Line 6 device, then keep in mind that any Add-On License Keys that have been added to that device will remain on it, and you won’t be able to transfer them to another device without physically connecting both Line 6 devices to your computer.
POD Farm 2 Advanced User Guide – Start Here Purchasing POD Farm 2 Plug-In for iLok If you don’t already have one, create a Line 6 account now. It is free and is necessary for activating and retrieving your POD Farm Plug-In license. To create your account, go here. To purchase the POD Farm 2 Plug-In license for iLok, you can go the Line 6 Online Store and select the iLok hardware option, or visit your favorite music gear retailer and pick up the boxed version.
POD Farm 2 Advanced User Guide – Start Here Next you’ll be prompted for the iLok User ID for your iLok.com account. Enter your iLok User ID - This is the “Username” you use to login to your account at iLok.com. Type it in and click Continue. Next you are prompted to verify that your iLok User ID is entered correctly - Please be sure it is to avoid the added task of contacting iLok to fix it! Click Confirm & Submit if all is correct.
POD Farm 2 Advanced User Guide – Start Here Next you are prompted to enter your iLok User ID - This is the user name you enter to login to your account at iLok.com. Type it in and click Continue. You are then asked to verify the iLok User ID is entered correctly - Please be sure it is to avoid the added task of contacting iLok to fix it! Click Confirm & Submit if all is correct. You should next see confirmation that your iLok Deposit was successful and your license has been sent to iLok.com.
POD Farm 2 Advanced User Guide – Start Here Follow the steps listed on the iLok.com page to Download the POD Farm 2 License to your iLok key... And you’re done! Once your iLok USB key is all configured, you can log out and exit the iLok web site.
POD Farm 2 Advanced User Guide – Start Here Windows® users - When you see the Choose Hardware Type screen during the POD Farm 2 installation, be sure to check the box for “POD Farm 2 for iLok.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Using Your Line 6 Hardware The POD Farm™ 2 software is designed to work with the Line 6 POD Studio™ family of USB audio interfaces, as well as with the Line 6 TonePort™ and GuitarPort™ devices. Additionally, a POD Farm™ 2 Plug-In license can purchased for Line 6 POD® X3 and POD®xt family devices, and for any iLok USB “smart key.” This chapter includes details on using POD Farm 2 with all Line 6 USB hardware.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Note: Be sure to always power off or mute your speakers or monitoring setup before connecting and disconnecting the USB cable between your Line 6 device and computer, as well as before booting up or shutting down your computer if the device is already connected.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware GX Connect your electric Guitar or Bass Instrument Input - Plug in your electric guitar or bass here to feed the instrument’s signal into the POD Farm 2 standalone application. This allows you to choose your Tone, and then route the processed signal to the Record Sends (to your audio software) and your ToneDirect™ monitoring signal to the hardware outputs.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware UX1 Connect your electric guitar or bass Connect your stereo headphones Connect a microphone Mic Input - Connect a microphone here using an XLR cable. This feeds the microphone signal into the POD Farm 2 standalone application where you can choose your Tone, and then route the processed signal to the Record Sends (to your audio software) and your ToneDirect™ monitoring signal to the hardware outputs.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Monitor In - If you want to hear the signal from a line level source mixed with all the other audio coming from your computer, but do not want this audio recorded, then plug the source in here (this Monitor signal is not fed to the Record Sends).
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Connect your USB cable from your computer’s USB port Connect to the S/PDIF input of an external device to send your UX2 output digitally Connect a footswitch here to send MIDI control messages Connect any line level input source that you want to record into the Line Inputs Connect any line level input source for monitoring to the Stereo Monitor In Connect the Analog Outs to your audio monitors Line Inputs - If you want to record the signal fro
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware UX8 TonePort UX8 is a multichannel recording interface designed for professional use, offering plenty of headroom, a wide dynamic range and an exceedingly low noise floor. Designed with high quality electrical components and a rugged exterior, UX8 is built to provide many years of reliability.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Footswitch & Expression Pedal Inputs Connect up to two on/off footswitches in the Footswitch 1 & 2 inputs, and an expression pedal in the Expression input to send MIDI control messages to POD Farm 2, or to most any DAW or MIDI software on your computer. For the footswitch, you can use most any available “momentary” or “sustain pedal” type footswitch that includes a 1/4 inch connector.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Front Panel Features Guitar/Bass Inputs • High-Z instrument inputs for guitar and bass are conveniently located on the front panel, providing convenient access for fast instrument switching. • -20 dB pad switches provide attenuation for hot levels, typically for instruments with onboard preamps or active pickups.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Signal and Clip LEDs Signal and Clip LEDs exist for each input. The signal LED lights up when signal activity is present, glowing brighter as the signal level increases. When the input level reaches the 0 dBfs, the clip LED lights up momentarily. You should always adjust your input levels to avoid clipping for the best recordings! VU Meter and Clip Display UX8 provides a stereo pair of large VU meters on the front panel.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Power Button When the power button is engaged, the UX8 main LEDs will illuminate. UX8 is not USB powered and receives no power from the computer. LED status indicators The Main Mute and Main Clip LEDs provide secondary functions in their ability to indicate the connection status of USB and S/PDIF, as follows: • No USB connection - The main clip LEDs alternate steadily between left and right, about once every second.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Microphone Inputs - You can receive input from one or two mics at the same time using these inputs. There is also a +48V Phantom Power switch (to the right) that you should toggle to “on” if your mic requires phantom power (most condenser type mics do, but check the documentation for your mic if you are not sure). Connect each mic using an XLR cable.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware TonePort DI Connect your electric Guitar or Bass Instrument Input - To connect your electric guitar or bass, plug it into this input. When using POD Farm 2 in standalone operation, this connection routes the instrument’s signal into POD Farm 2 where you can choose your Tone, and then route the processed signal to the Record Sends (to your audio software) and to the Analog Outs.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Analog Outputs - These Left and Right 1/4 inch jacks are your main outputs and carry all the audio from TonePort D.I. - The audio from your audio software on the computer, and anything plugged into the D.I. Instrument input. These are what you want to connect to your powered speakers or monitoring system if you are using TonePort D.I. as your primary audio interface for your recording software.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Monitor In - If you want to hear the signal from a line level source mixed with all the other audio coming from your computer, but do not want this audio recorded, plug the source in here. Note that this is a stereo jack, so you should use a stereo 1/8-inch tipped stereo audio cable for this connection. You’ll hear any audio coming into this jack via the Analog Line Outs and Phones, but it won’t be fed to the GuitarPort Record Sends.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware The following sections cover the basic connections for using POD X3 family devices for recording. Use these links to jump to the section covering your specific POD X3 device: “POD X3” “POD X3 Live” “POD X3 Pro” Be sure to also check out your POD X3 Pilot’s Handbook and the additional documentation found on the POD Farm Online Help page of the Line 6 site. POD X3 Left & Right Analog Outputs – Connect to your powered speakers or mixer USB 2.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Phones - If you want to listen using stereo headphones, then plug them into this 1/4 inch stereo jack. This Headphone jack outputs the same signal fed to the Analog Line Outs; the audio from your audio software on the computer, as well as anything plugged into Inputs 1 &2. Left & Right Outputs - These Left and Right ¼-inch jacks output all audio signals; the audio from your DAW, and anything plugged into any Inputs 1 & 2.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware CD/MP3 Input – Connect a CD player, MP3 player, drum machine or other audio device into this stereo 1/8-inch jack and you’ll hear it at the POD X3 Live Phones, Direct Out, and Live Out so you can jam along. Note that the audio coming into this input is not routed to the Record Sends, so it won’t be recorded. Phones - If you want to listen to the audio using stereo headphones, then plug them into this 1/4 inch stereo jack.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware MIDI In & Out - Connect to your computer’s MIDI ports or the MIDI ports of another MIDI device using standard 5-pin cables to send & receive MIDI communication. POD X3 Live can respond to incoming MIDI control messages received on this MIDI input, allowing most of its features to be controlled remotely by software or another MIDI device. Additionally, most parameter adjustments on POD X3 Live will transmit MIDI control messages to this MIDI Out.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware applying two Tones on your Input 1 - just dial up one of the tone presets in the “Blends” folder of POD X3 and you’ll have two complete Tones applied to your channel strip 1 input signal! Or, go to the POD X3 Inputs screen to choose exactly what you want Tone 1 and Tone 2 applied to.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Rear Panel Connections Look around back of your X3 Pro for more ins & outs. AES/EBU In & Out - Connect digitally to other AES/EBU devices S/PDIF In & Out - Connect digitally to other S/PDIF devices FBV Pedal In - Connect a Line 6 FBV controller MIDI In/Out - Connect to a computer MIDI port or another MIDI device Variax In - Connect your Variax Guitar USB 2.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware This means you can actually control the many parameters in POD Farm 2 Plug-In or your DAW software by connecting this MIDI out to a MIDI input port on your computer, and then setting your DAW software to receive this MIDI communication. Go to the POD X3 System screen to set the MIDI Channel that is used for MIDI transmission. Please see the POD Farm 2 Plug-In MIDI Control section for more information.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Studio/Direct Outputs – These balanced XLR outs carry your tone complete with speaker/microphone/ room simulation, perfect in the studio for pro-quality sound or as a direct send to a house mixer or PA when playing live. Output Level Switch – Use this to toggle the level of the Studio/Direct Outputs to best match the hardware inputs you are plugging into - Mic or Line level.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware PODxt Family Devices If you own a PODxt, PODxt Live or PODxt Pro, then you can also reap the DAW benefits with the purchase of the POD Farm 2 Plug-In Add-On license! To get POD Farm 2 Plug-In, just connect PODxt to your computer and run Line 6 Monkey, where you can purchase, download and install everything you need without even leaving your chair. Read more in the Line 6 Monkey section on page 1•2, or just head on over to the Line 6 Online Store.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware PODxt Phones - Connect your stereo Headphones Instrument Input Connect your guitar or bass Instrument Input – Connect your electric guitar or bass here using a standard 1/4-inch instrument cable. PODxt itself contains the processing power that turns your naked input signal into that roaring guitar Tone, which is then fed out the Analog Line Outs, as well as fed to the Record Send 1-2 digitally to your computer across the USB connection.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware PODxt Live Instrument Input - Connect your guitar or bass Aux Input – (Monitor in) connect a line level, stereo output (from your stereo, MP3 player, etc) Analog Line Outs – connect to your powered speakers or mixer Phones - Connect your stereo Headphones USB - Connect to your computer Instrument Input – Connect your electric guitar or bass here using a standard 1/4 inch instrument cable.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware PODxt Pro Phones - Connect your stereo Headphones Instrument Input Connect your guitar or bass Instrument input – Connect your electric guitar or bass here using a standard 1/4-inch instrument cable.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Unbalanced and Balanced Analog Line Outs - The Left and Right Unbalanced ¼ inch jacks and the Balanced XLR jacks output all audio signals; the audio from your DAW, and anything plugged into any the Instrument inputs (and effects loop, if you are using it). So, these are what you want to connect to your monitoring system when using PODxt Live as your computer’s sound card.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware In the PODxt Signal Routing selector you can choose one of four routing modes for the signals that run inside PODxt, and to Record Send 1-2: • Send Processed Guitar - This is the normal mode of operation: PODxt-processed sound is sent to your computer via Record Send 1-2 so it can be recorded in your audio software.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Connecting analog outputs to an external device You can route the POD Farm 2 standalone application Tones to just about any type of external device simply by connecting the Analog Outs from the back of your POD Studio, GuitarPort, TonePort or POD directly into the external device’s line level, analog inputs. This allows you to amplify or record your POD Farm 2/POD signal using any external device that accepts analog line level inputs.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware ToneDirect™ Monitoring while Recording with POD Farm 2 Plug-in ToneDirect™ is a feature of the POD Farm 2 application when run in standalone mode. So, in order for you to enjoy the feel and responsiveness provided by ToneDirect™, you’ll need to run the “standalone” POD Farm 2 application alongside the DAW host software hosting your POD Farm 2 Plug-in.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Setting Mac OS® X to use your Line 6 hardware as the Default Audio Device These settings are made within the Audio MIDI Setup utility, found at /Applications/Utilities/Audio MIDI Setup. Make the following settings for your Mac OS® X version. Mac OS® X 10.4 & 10.5 - Audio MIDI Setup utility settings for Default Device • Default Input - Set this to be your Line 6 audio device if you want your applications to use it for audio recording.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Mac OS® X 10.6 - Audio MIDI Setup utility settings for Default Device Select your Line 6 audio device in the left panel and then click the Settings menu at the bottom of the window: • Default Input - “Use this device for sound input” if you want your applications to use this device for audio recording.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware Windows® XP Sounds and Audio Devices settings for Default Device • Sound Playback Default Device - Set this to be your Line 6 audio device if you want your applications to use it for audio playback. Click Volume button to adjust the playback level. (Keep the sliders set to 100% and use the Output & Phones knobs on your Line 6 hardware to adjust playback levels more easily.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware • Sound Playback Default Device - Select your Line 6 audio device here in the Playback tab and choose “Set Default” if you want your applications to use it for audio playback. Click Properties button to adjust the playback level. (Keep the sliders set to 100% and use the Output & Phones knobs on your Line 6 hardware to adjust playback levels more easily.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware On Windows Vista® and Windows® 7 only, you’ll also see this “Listen” tab once you click the Properties button from the Recording tab screen. The “Listen to Device” checkbox and “Playback through...” menu, when configured as shown above, route any audio that is fed into an input on your Default Recording Device to the selected Playback device.
POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware POD X3 & PODxt users: You are not running the POD Farm 2 standalone application, but no need for you to miss out! You can send your fully processed POD Tone directly into another sound card in much the same way. Connect the mono 1/4inch Analog Left & Right Outputs.
POD Farm 2 Advanced User Guide – Driver Panel & Recording Line 6 Driver Panel & Recording So, just how does all that huge amount of Tone get routed around between your Line 6 gear, computer and recording software you ask? All this is performed by the audio driver - a software component installed with POD Farm™ 2 that allows the audio to be routed to the right place.
POD Farm 2 Advanced User Guide – Driver Panel & Recording The options in the Line 6 Audio-MIDI Devices dialog are slightly different if you are on a Windows® versus a Mac® system, and also slightly different depending on which Line 6 hardware you are using.
POD Farm 2 Advanced User Guide – Driver Panel & Recording 3 – Driver version: Displays the current device’s installed driver version number. 4 – ESN: Displays the current device’s unique Electronic Serial Number. 5 – ASIO® Client indicator: If you are running audio software that is using this Line 6 device as its ASIO audio interface, the name of the software will appear here. If not in use by an ASIO software, “none” is displayed here, as shown in the above example.
POD Farm 2 Advanced User Guide – Driver Panel & Recording In Sound panel’s Playback tab you can designate your Line 6 USB device as the “Default” audio device (see “Setting Windows® to use your Line 6 hardware as the Default Audio Device” on page 2•33). The Sound Control Panel dialog - Playback tab You can also click on the Properties button and access the default format setting for the Sample Rate and Bit Depth for your Line 6 device when used with Windows® multimedia applications.
POD Farm 2 Advanced User Guide – Driver Panel & Recording Inputs & Recording Tab - Windows Input Source Menu: This allows the user to select which physical input “source” is used on the Line 6 USB hardware (Mic 1, Instrument, etc.) Note that this menu is ONLY selectable when the POD Farm 2 standalone software is not in use by the Line 6 hardware. When POD Farm 2 is in use, this selector remains grayed out, but displays the current Source that is selected within POD Farm 2 standalone.
POD Farm 2 Advanced User Guide – Driver Panel & Recording POD Studio, TonePort & GuitarPort devices (except UX8) show the following Sends: TonePort devices show two stereo Sends (Record 1-2 and Record 3-4) • Single Tone Source (Mono/Stereo): When the POD Farm Standalone application is not running, Record Send 1-2 and 3-4 both carry the unprocessed signal.
POD Farm 2 Advanced User Guide – Driver Panel & Recording PODxt devices show one Record Send (Record 1-2). The type of signal that is routed to the Record Send 1-2 is determined by the PODxt Signal Routing option within the Audio Signal Routing menu at the left, (see “PODxt - Audio Signal Routing & Re-Amping” on page 2•28 for more about the options in this menu).
POD Farm 2 Advanced User Guide – Driver Panel & Recording The Inputs & Recording tab lets you select specific inputs for recording. Input Source options are as follows: Input 1: Instrument 1 or XLR 1 or Line 1 or S/PDIF (L) Input 2: Instrument 2 or XLR 2 or Line 2 or S/PDIF (R) Input 3: XLR 3 or Line 3 Input 4: XLR 4 or Line 4 Input 5: XLR 5 or Line 5 Input 6: XLR 6 or Line 6 Input 7: XLR 7 or Line 7 Input 8: XLR 8 or Line 8 You can also link inputs into stereo pairs.
POD Farm 2 Advanced User Guide – Driver Panel & Recording If the POD Farm 2 standalone application is currently running, then Sends 9-10 and 11-12 will carry the type of signal defined within POD Farm 2 Mixer view - Record Send Source menus (Processed, Semi-Processed or Dry) - see the POD Farm 2 standalone chapter’s “Mixer View” on page 6•8 section for details. Hardware Meters Show Use this menu to select the input and output levels you want the UX8’s hardware meters to display.
POD Farm 2 Advanced User Guide – Driver Panel & Recording You can specify different mix settings for each pair of UX8 outputs if you like. By default, the only sounds that come out of the UX8 are the computer’s output and POD Farm 2 Record Send 9-10 signal (determined by the POD Farm 2 Mixer View - Record Send settings), all through the physical Main Outs 1-2. You can directly monitor other UX8 inputs by un-checking the Mute checkbox for the corresponding input source in this tab.
POD Farm 2 Advanced User Guide – Driver Panel & Recording Main Mix vs. Talent Mix The UX8 two front panel headphone outputs mirror Outs 1-2 and 3-4, respectively. You can use the monitor controls, for example, to create a “main mix (1-2)” that captures the overall image of the recording project, while a separate “talent mix (3-4)” can be provided for the musician who is currently performing a new part, and may need a click track and an ample level of themselves above the rest of the mix (you know...
POD Farm 2 Advanced User Guide – Driver Panel & Recording Mac® - Line 6 Audio-MIDI Devices Dialog You can launch the Line 6 Audio-MIDI Devices dialog from within the Mac® System Preferences, or from the POD Farm 2 standalone application’s Preferences > Hardware tab. On Mac® systems, all Line 6 hardware utilizes the Mac OS® X Core Audio driver format, which means that some of your Line 6 device settings are found in the Mac OS® X Audio-MIDI Setup dialog.
POD Farm 2 Advanced User Guide – Driver Panel & Recording 6 – Sample Rate Converter Active indicator: POD Studio, TonePort and GuitarPort devices support 44.1 and 48 kHz sample rates natively, and support 88.2 and 96 kHz sample rates by way of an internal sample rate converter.
POD Farm 2 Advanced User Guide – Driver Panel & Recording 5c – Audio Input: • In the top selector, you will be able to choose the Record Send for your Line 6 device to view its format settings below. • The Format selectors show you the Sample Rate* and Bit Depth that the Line 6 device is operating at for recording. The Bit Depth for all Line 6 devices is fixed at 24 bit.
POD Farm 2 Advanced User Guide – Driver Panel & Recording Mac OS® X Audio-MIDI Settings Dialog (UX8 Only) 5a 5b 5e 5c 5d 5f 5a – System Settings: • The Default Input and Default Output options allow you to choose the audio interface you want your audio applications to use by default. If you want this to be your Line 6 device, select your UX8 here.
POD Farm 2 Advanced User Guide – Driver Panel & Recording 5d – Volume sliders (audio input): These sliders 1 - 12 are not functional with UX8 - use the POD Farm Standalone Mixer sliders and/or Tone volume instead of using these sliders to set your Record Send levels for Line 6 devices. 5e – Audio Output: • The Format selectors show you the Sample Rate* and Bit Depth that the UX8 is operating at for playback. The Bit Depth for all Line 6 devices is fixed at 24 bit.
POD Farm 2 Advanced User Guide – Driver Panel & Recording When the POD Farm 2 standalone application is not in use by the selected Line 6 device, this Input Source menu offers a list of input options. The options will differ depending on the Line 6 device (POD Studio and TonePort) UX2 displays the following: When POD Farm 2 standalone is not running, the Input Source Select menu is available. As shown here, UX2 offers several input Sources to choose from.
POD Farm 2 Advanced User Guide – Driver Panel & Recording POD X3 devices show a list of 5 Record Sends: Note that the type of signal that is fed to each Send is configured on the POD X3’s on-board Outputs settings screen. For example, Send 1-2 carries the same “Direct/Studio” signal you hear on POD X3’s Main outputs, which could be just Tone 1, or some combination of Tone 1 & 2.
POD Farm 2 Advanced User Guide – Driver Panel & Recording Line 6 Audio MIDI Settings Dialog - Inputs & Recording Tab (UX8 Only) 1 2 3 4 5 1 – Input Source Select: UX8 offers 8 individual input sources, each with its own selector where you can choose which physical input is to be used for each.
POD Farm 2 Advanced User Guide – Driver Panel & Recording When POD Farm 2 standalone is not running, the Input 1 & input 2 selectors are available. As shown here, UX8 offers several input Sources to choose from. The selected Source is what gets fed to the Record Send. Stereo Paired Inputs You can also link inputs into stereo pairs. This affects hardware monitoring controls in the Outputs & Monitoring tab (see below).
POD Farm 2 Advanced User Guide – Driver Panel & Recording 5 - Restore Defaults: Click this button to restore all this tabs settings to their original default values. Outputs & Monitoring Tab (UX8 Only - Mac®) Important: Note that the Outputs & Monitoring tab provides control over monitoring levels - that is, what you hear coming from whatever you plugged into the UX8 Mic or Line inputs. These controls do not affect the level of the signals fed to the Record Sends.
POD Farm 2 Advanced User Guide – Driver Panel & Recording By default, the only sounds that come out of the UX8 are the computer’s output and POD Farm 2 9-10 signal, all through Main Outs 1-2. You can directly monitor other UX8 inputs by un-muting (unchecking the Mute checkbox) the corresponding input source in this tab. UX8 provides monitoring through the hardware with zero latency, which is ideal for tracking with multiple sources simultaneously.
POD Farm 2 Advanced User Guide – Driver Panel & Recording Stereo Pairs When the “Stereo” checkbox is active in the Inputs & Recording tab for a pair of Inputs, the representative Inputs in the Outputs and Monitoring tab will display them as “locked” as a stereo pair. The lock icon represents two sources linked as a stereo pair. The Pan sliders for a “locked” stereo pair are automatically set to 100% Left and Right.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In POD Farm™ 2 Plug-In Welcome to the wonderful world of POD Farm™ 2 Plug-In, where legendary, studio-standard tone and classic vintage effects are all available to you within your favorite Windows® or Mac® DAW (Digital Audio Workstation) software, in a flexible, native software Plug-In format! Note that most features described in this chapter regarding POD Farm 2 Plug-In are also the same for POD Farm 2 when in standalone operation as well as for the indivi
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In About Plug-Ins There are many types of “Plug-Ins” in the world of software. Plug-Ins are relatively small applications that can only run when loaded inside a compatible “host” software application. Plug-Ins operate within the host application to extend the capabilities of the host.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In *For POD Farm Elements Plug-Ins: You’ll see these appear as 11 individual Plug-Ins within your DAW host’s Plug-In menus, titled “POD Farm Guitar Amps,” “POD Farm Delays,” etc. You have some options during the POD Farm 2 installation to tell the Plug-Ins where to install, but if you did not define a custom location, here is the default install location for each of the POD Farm 2 Plug-In formats.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In POD Studio™ and Other Line 6 Hardware: The POD Farm 2 license is included free with the purchase of any Line 6 POD Studio device (as of the release date of POD Farm 2), and available for purchase as an “Add-On” (or upgrade) if you own a Line 6 POD Studio that came with POD Farm version 1. The POD Farm 2 license is also available for purchase as an optional Add-On for Line 6 TonePort™, GuitarPort™, POD® X3 or POD®xt devices.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In 1 - Main Control Bar The Main Control Bar is always shown at the top of the POD Farm 2 Plug-In window, and includes a number of global controls and “View” buttons.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • Open - Allows you to browse your computer to open a specific .l6t Tone preset file directly. This includes .l6t Tone preset files you may have created with POD Farm 1, Line 6 Edit, GearBox or GuitarPort applications too! • Save - Saves the currently loaded tone, if it is in an unsaved state.* • Save As - Creates a copy of the current Tone settings as a new .l6t Tone Preset File wherever you like on your computer.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Master Output Control - Use the knob and meter here to optimize the audio signal from the Plug-In fed back to the host (post Plug-In processing). • If you have a Dual Tone signal path, this controls the total mix of Tones A & B. • The knob provides level adjustment up to +18 dB of gain - for unity gain, set knob to the dot, as shown (or just double click on the knob to “reset” to unity). • Stereo level meters provide peak display with clip indicators.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In About Box Button (Line 6 Logo) - Click here to launch the “About” box, which includes plenty of geeky information, such as the software version, the Line 6/iLok hardware that the Plug-In is using for its authorization, your active “Add-On” Model Packs - and don’t forget to wait for the scrolling credits, if you are into that kind of thing.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Gear View Selected Category Model Categories Selected Model Scroll Bar Peripheral Models Selecting Model Categories • Press the Gear View button within the Main Control Bar to access Amp and Effect Models. • Model category menus are listed horizontally along the top of the Gear view (e.g. - Guitar Amps, Bass Amps, Preamps, etc.) • The currently selected category menu appears lit.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Mouse cursor indicates the Preamp model being dragged cannot be dropped. White arrows indicate the legal position where the Preamp can be inserted White arrows indicate the legal drop location for a dragged model • Model Replacement indicator in SFV - A Tone path cannot exceed its maximum model capacity (one each max. for Amp, Cab & Preamp models, and ten total effects models max. for each Tone path).
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Amp Bypass Button Amp View Button Amp Model Menu Cab View Button Amp Edit Panel Amp Bypass Button - Press to bypass the Amp model processing and hear the dry, unprocessed sound. (Note that this bypasses the current Amp, Cab and Mic models). Amp & Cab View Buttons - Press to toggle between displaying the Amp or the Cab View. (If you have a preamp in use, rather than a guitar or bass amp, you won’t see these Amp/Cab buttons.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Room % Value (Early Reflections) • Drag the cabinet toward the back of the room for more ambient room tone, or toward the front for less. • Alternatively, you can click directly on the numerical field and drag up/down to adjust the amount of “room” sound (or “early reflections” in recording lingo). Or, double-click directly in the field to type in a specific value. Cabinet Model Menu - The currently selected Cabinet model name is displayed.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Effects View Effect Bypass Button Effect Model Menu FX Time/FX Speed Controls Effect Bypass Button - Bypasses the effect without removing it from the signal path Effect Model Menu - Displays the current effect model. Click on the downward arrow next to the name to select another model from within the current effect model category. Click on the up/down arrow buttons at the left to navigate through the available models one at a time.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • When FX Time/FX Speed Sync is ON, the effect’s time/speed parameter follows the BPM “System Tempo” (see previous section). With Sync on, you’ll also be able to modify the effect tempo by a note value (see the Time/Speed knob description below).
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Presets View Presets View provides a convenient way to browse and load Tones from your local Tone library. Just double-click any preset to load it - or drag the preset directly form the Presets List on the right directly into the Signal Flow View below.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Click on any column’s “grab bar” and drag to resize column width Right click (Windows®) or Ctrl+click (Mac®) on the header bar Select the desired columns to be displayed in the Preset List Pane The Preset List Pane - columns menu Refresh Button - If you’ve modified Tones, such as by doing a Save As, created New Tones, or made changes to the Source Folder configuration, you may need to click this Refresh button to update the Preset List to show the curre
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Source Folder Configure Button - If you want to configure the Source Folder contents, so that the Presets View can display other Tone presets you have stored on your computer (.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • Remove from Library - Removes the selected Preset(s) from the Presets List. Note that this does not permanently remove the Tone Preset .l6t file from your hard drive, it only makes the Presets View “ignore” the Preset. Therefore, if you perform a Scan the Preset will re-appear in the Presets List. If you wish to permanently delete a Tone Preset, you can do so by accessing the .
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In The Tone Info dialog - Info tab in Multiple mode (multiple Tones selected) Models Tab - The Models tab shows you all the amp & effects models used within the selected Tone(s), including info about each of these models. (Also see “Loading a Preset with “Non-authorized” Models” on page 4•22.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Saving a Tone Preset To save the currently loaded Tone Preset, click on the Tone options button to the left of the Preset menu on the Main Control Bar and select Save to overwrite the current Preset with your edited settings. Upgrading a Tone Preset - If you’ve opened an .
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Target Tone Type - Use the Target menu to save the Tone Preset in a particular Tone format, to set the Tone preset’s compatibility for POD Farm version 2 or other, earlier Line 6 applications or devices. The Save As - Target menu Note that the list displayed in the Target menu will include only “valid” Target formats for the Tone you are saving.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Loading a Preset with “Non-authorized” Models As discussed in the Start Here chapter, Line 6 offers optional Model Pack Add-Ons for your Line 6 hardware, as well as a “Platinum” license version for iLok, which expand the set of Amp & Effects Models available within POD Farm 2 (as well as within the POD Farm Elements Plug-Ins).
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • Model Pack - If you are using a Line 6 USB device for POD Farm 2 (rather than an iLok), then this column tells you which Model Pack each model requires. In our example, we can see that the non-authorized models require the Bass Model Pack, which the Line 6 device does not include.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In To create a Setlist - Right click (Windows®) or Ctrl+click (Mac®) directly on the Setlists header within the left pane of the Presets View, and select the “New Setlist” command: Right click or Ctrl+click on the Setlists header to access the “New Setlist” command A new Setlist is created at the bottom of the list and automatically numbered TIP: Whenever you open a Line 6 Bundle .l6b or Collection .
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In TIP: Setlists and the Tone Presets within them can be navigated using MIDI Bank & Program Change messages from an external MIDI Controller - Please see “POD Farm 2 Plug-In MIDI Control” on page 4•34. Mixer View The Mixer View is the place to go to get control over the audio input and output options for the Tone A and Tone B signal paths.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In *Note that DAW hosts differ in the options they offer for audio channels and signal flow routing. For example, some offer “mono” and “stereo” tracks, while others offer only one type of track that accepts either mono or stereo files (and for this latter type, the track input/output is typically “fixed” as stereo - even with mono audio clips). Further, some DAW applications offer mono versus stereo buses, where others offer only stereo.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Mute Button - Tone A or B can be muted individually by activating the Mute button. When muted, the respective Tone path in the Signal Flow View is dimmed, and no audio at all is passed from its output back to the DAW. All models remain visible within the SFV and still fully editable when the Tone is muted.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Pitch Indicator “Flat” Indicator Arrow Reference Control Note Display Mute Switch Tuning Indicators - The Note Display in the center of the tuner will tell you the note you plucked, while the Pitch Indicator appears within the horizontal meter display, informing you if your tuning is flat (left of the center of the meter) or sharp (right of the center).
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Tone A Tone B Signal Flow View - Dual Tone Mode Model Controls & Context Menu Options Model Controls - Hovering over a model icon within the SFV displays an Enable/Disable button as well as the name of the model. Use the Enable/Disable button to bypass the model, allowing your signal to flow through it unprocessed. The model icon appears transparent when disabled.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Selecting a Model - Clicking once on any model icon “selects” the model, as indicated by the amber “corners” that appear around it. Selected Model Non-Selected Model Mixer Control Click on the Mixer Control icon to enter the Mixer View, where individual Tone level and input/ output settings can be made. Mixer Control Please see the “Mixer View” on page 4•25 for details about all settings within the Mixer.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Guitar and Bass Amps in the Signal Flow View There are several options for matching amps with speaker cabinets in POD Farm 2, therefore, you’ll see your loaded Amp + Cab displayed in the Signal Flow View differently, depending on your selection (also see “Cabinet View” on page 4•11).
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • It is also possible to have no Amp loaded at all, or only a Preamp in your Tone, in which case, of course, you’ll see no Amp/Cab/Mic in the SFV. • If you add a Cab from the Gear View, Cab menu or carousel to a Tone path where no Amp model yet exists, you’ll see that a “Power Amp” is automatically added to provide a transparent amplification source to drive you new Cab.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • When dragging any one of these models left or right in the same Tone path, the entire Amp Group is always moved together. This allows you to reposition the entire Amp Group within your Tone’s signal flow. • Effects models cannot be placed between any of the Amp Group models. • If you drag any model of the out of the Signal Flow View to delete it, you will see the entire Amp Group being dragged, however, only the selected model is deleted.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • Effect in Post: Mono-in to Stereo-out - Most Distortion, Dynamics & Filter category effects receive Mono input (except for Stereo in & out models - see next point), as well as several Mods & Delays. For these effects, Mono is created as a Left/Right collapse and fed into the input of the effect. Effect output is Stereo.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Mac OS® X Windows® 7 or Vista® Windows® XP MIDI Out Port 1 FBV Shortboard Mk II (Port 1) FBV Shortboard Mk II USB Audio Device MIDI Out Port 2 FBV Shortboard Mk II (Port 2) MIDIIN2 FBV Shortboard Mk II USB Audio Device [2] MIDI Out Port 3 FBV Shortboard Mk II (Port 3) MIDIIN3 FBV Shortboard Mk II USB Audio Device [3] MIDI Out Port 4 FBV Shortboard Mk II (Port 4) MIDIIN4 FBV Shortboard Mk II USB Audio Device [4] • POD Studio and TonePor
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Select your Line 6 device here so that Live will receive MIDI from it Click the Track and Remote buttons both to On for your Line 6 device’s MIDI Input* *It is actually only necessary to turn on the MIDI In “Remote” option to allow Live to receive MIDI controller data from the selected device. However, to allow Live to receive MIDI into a MIDI track you do need to turn on the “Track” option.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Column Header - Click on any column name to sort the list up or down by the selected column. Note that you can also resize the width of a column by clicking on the little “grab bar” at the right of the column title and dragging. MIDI & Automation Assignments buttons - Click to toggle between the MIDI Assignments and Automation Assignments displays.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Min & Max Value - These columns show the minimum and maximum values for the assigned parameter. All “variable” type parameters in POD Farm 2 (knobs, faders, etc.) can have their Min. and Max. positions custom defined (rather than the default 0% to 100% range) by way of the parameter’s context menu. These Min. & Max. values are applied when accessing the parameter via MIDI remote control. See “Minimum and Maximum Position Values” on page 4•41.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • For FBV Shortboard MkII - Load the file named “POD Farm 2-Shortboard.fbv.” This preset provides all the MIDI commands listed in the above table to access the pre-configured On/Off and Wah pedal parameters, as well as some additional MIDI CC commands. • For FBV Express MkII - Load the file named “POD Farm 2-Express.fbv.” This preset provides the MIDI commands listed in the above table to access the pre-configured Wah pedal parameters.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • Adjust the control on your MIDI device to send its MIDI control message. Since we want to remotely control the Mix knob here (a “variable” parameter that can be adjusted), move the pedal or a knob on your MIDI controller device. (When mapping to POD Farm 2 “on/off” type parameters, it is better to use a switch or footswitch control on your device.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In TIP: Many DAW applications additionally offer their own MIDI Learn capabilities, where DAW parameters and Plug-In parameters can be accessed directly within the DAW’s user interface. POD Farm 2 Plug-In parameters can typically be accessed this way for MIDI Control as well - see your DAW’s documentation! Minimum and Maximum Position Values By default, all variable parameters (knobs, sliders, faders, etc.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • To switch through Setlists - At the left of each Setlist you create, you’ll see that each is automatically numbered, starting with “0.” The Setlists include a “hard-coded” MIDI assignment where you can set your controller to send MIDI Bank Change messages 0 through 16383 to call up the respective numbered Setlist.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In In addition to the 32 assignable Automation Slots, POD Farm 2 Plug-In also presents several additional “fixed” parameters within your DAW host’s parameter menu, regardless of the loaded POD Farm 2 Tone Preset.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • The name within the Slot provides descriptive information about the assigned parameter. For example, the assigned knob parameter in the above screenshot: B - Analog Delay w/Mod (FX5) - Mix, refers to the “Mix” parameter of the “Analog Delay w/Mod” effect. The “B” indicates this model is in Tone B, and the “(FX-5)” indicates the specific effect model instance (see the Model Instance description on page 4•45).
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Clear All - Click to remove all assignments currently shown in the Automation Display, regardless of selected items. Automation Assignment columns • Clear button - Click this button at the left of any row to remove the individual automation assignment. • Parameter - Relates to the number of the Plug-In Parameter Automation Slot’s name, as it appears in your DAW application’s automation menus (“Knob 2,” “Switch 1,” etc.).
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Accessing POD Farm 2 Plug-In Parameters in your DAW for Automation Typically, a selectable list of Plug-In automation parameters in your DAW host application will display all 32 POD Farm 2 “assignable” parameters, plus all “fixed” parameters, for each loaded instance of POD Farm 2 Plug-In. The assignable Automation Slots appear in this menu, regardless if you have actually assigned a specific amp, preamp or effect parameter to these 32 Slots.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In • In the Live “Device Panel,” place the inserted POD Farm 2 Plug-In into “Configure Mode.
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In Please see the Ableton Live documentation for more about its automation features. Also, see the POD Farm 2 Recording Setup Guide for more tips on Plug-In automation in different DAW host applications! This covers POD Farm 2 Plug-In.
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins POD Farm™ Elements Plug-Ins Included as part of the POD Farm™ 2 package is an entire set of additional Plug-Ins that we refer to as the POD Farm™ Elements Plug-Ins. By default, these are installed on your Mac® or Windows® computer during the POD Farm 2 installation. Like POD Farm 2 Plug-In, the Elements Plug-Ins come in the same Mac® (AU, VST® & RTAS®) and Windows® (VST® & RTAS®) Plug-In formats.
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins *Note: The POD Farm Tuner Plug-In does not include the Main Control Bar Input & Output Controls or Model Menu. • Input Control - Use the knob and meters here to optimize the audio signal fed into the Plug-In.* The “colorized” stereo level meters provide the following input level information: • The green to yellow range of the meters indicates up to -18 dB (instrument level).
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins • Model Menu - Offers selection of the available amp/preamp/effects models. Note: The models available in each Elements Plug-In Model Menu is determined by the POD Farm 2 license and/or Model Packs you own for your Line 6 device or iLok. You see the same additional models within the Elements Plug-Ins as you do in POD Farm 2 when you have Add-On Model Packs.
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins Elements “POD Farm Guitar Amps” Cab Edit Panel Please see the POD Farm 2 Plug-In Amp View and Cab View descriptions on page 4•10 for details. Functionality is the same as for the Elements Cab View features.
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins Note: Unlike POD Farm 2 Plug-In, the automatable parameters within Elements Plug-Ins are all “fixed” that is, it is not required to assign an Elements Plug-In parameter to an “Automation Slot” as is done with POD Farm 2 Plug-In. Each Elements Plug-In presents its list of parameter names in abbreviated form in order to accommodate length limitations of the host software.
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins POD Farm Elements Plug-Ins - Automation Parameter Reference As described in the previous section, All Elements Plug-Ins (with the exception of the Tuner) offers a set of automation parameters, accessible within your DAW host application.
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins DYNAMICS Param1 Model Param 2 Female De-Esser Frequency Amount Male De-Esser Frequency Amount Noise Gate Threshold Decay Red Comp Sustain Level Vetta Comp Sensitivity Level Vetta Juice Amount Level Volume Minimum Level FILTERS Filters Param1 Param 2 Param 3 Auto Wah Sensitivity Q Bender Pedal Heel Toe Buzz Wave Wave Filter Decay Clean Sweep Decay Sensitivity Q Sensitivity Q Dingo Tron Double Bass -1 Oc
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins MODS Models Param1 Param 2 Lumpy Phase Depth Bass Opto Tremolo Wave Phaser Feedback POD Purple X Feedback Depth Random Chorus Depth Bass Random S & H Depth Q Rotary Drum Tone Rotary Drum + Horn Tone Param 3 Treble Treble Sine Chorus Depth Bass Treble Stereo Expo Chorus Depth Predelay Feedback Stereo Square Chorus Depth Predelay Feedback Stereo Square Flange Depth Predelay Feedback Sweeper Depth Q Frequen
POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins Models PREAMPS + EQ (Preamp Parameters 1 - 6) Preamp 1 Preamp 2 Preamp 3 Preamp 4 Preamp 5 Preamp 6 A m e r i c a n Drive Classic Lo Freq Lo Gain Lo Shelf Sw. Hi Shelf Sw. Lo Mid Freq Vintage Drive Lo Freq Lo Gain Lo Shelf Sw. Hi Shelf Sw. Lo Mid Freq Vintage UK Drive High Pass Freq Lo-Fi Drive High Pass Freq Modern Lo Mid Gain Hi Pass Freq Lo Shelf Freq Lo Gain Lo Mid Freq. Lo Mid 10x Sw.
POD Farm 2 Advanced User Guide – Standalone Operation POD Farm™ 2 Standalone Operation This chapter covers features unique to POD Farm™ 2 standalone operation. Note that all other features are identical in operation to those of the Plug-In, so please review “POD Farm™ 2 Plug-In” on page 4•1 for details on other features.
POD Farm 2 Advanced User Guide – Standalone Operation POD Farm 2 Menu (This menu is found on Mac® only) • About POD Farm - Launches the About box, which includes info about your connected hardware, software version, Add-Ons & other geeky stuff - see “‘About POD Farm 2’ Dialog” on page 6•6. • Preferences - Launches the Preferences dialog, where you can configure various POD Farm 2 application settings - see ”Preferences” on page 6•3. • Quit POD Farm 2 - Exits the application.
POD Farm 2 Advanced User Guide – Standalone Operation Preferences The Preferences dialog offers some handy configuration settings for the POD Farm 2 standalone application. Launch the Preferences dialog from the POD Farm 2 menu (Mac®), or the File menu (Windows®). There are three tabs of settings to behold here - Tones, Hardware and MIDI.
POD Farm 2 Advanced User Guide – Standalone Operation Note that, due to some Windows® and Mac® operating system limitations, the following behaviors apply for these checkboxes: • If you are on Windows®, during the POD Farm 2 installation there is an option to toggle the file associations to POD Farm 2 for these three file types. By default, all three are “on.” If you run the POD Farm 2 installer again you can change these associations.
POD Farm 2 Advanced User Guide – Standalone Operation Line 6 Audio-MIDI Devices & Line 6 Monkey buttons - Click these handy shortcuts to launch these software utilities. • For more about the Line 6 Audio-MIDI Devices - please see “Line 6 Driver Panel & Recording” on page 3•1. • For more about Line 6 Monkey - please see “Updating & Registering with Line 6 Monkey™” on page 1•2.
POD Farm 2 Advanced User Guide – Standalone Operation ‘About POD Farm 2’ Dialog Launch the ‘About’ dialog from the POD Farm 2 menu (Mac®), or the Help menu (Windows®). Launch the POD Farm 2 Help documentation Application version information Line 6 Device in use by POD Farm 2 Active Model Packs for current device Help button - Click here to launch the POD Farm 2 Basic User Guide.
POD Farm 2 Advanced User Guide – Standalone Operation Main Control Bar The Main Control Bar is always shown at the top of the POD Farm 2 window, and includes a number of global controls and “View” buttons. The controls are the same here as described in the Plug-In chapter’s “1 - Main Control Bar” on page 4•5, with the exception of the Input & Output controls, described as follows.
POD Farm 2 Advanced User Guide – Standalone Operation • If you have a Dual Tone signal path, this controls the total mix of Tones A & B. • The knob provides level adjustment from 0 (silence) to 100% (unity gain). • Stereo level meters provide peak display with clip indicators. TIP: Many models within POD Farm 2 are capable of adding a significant amount of gain to your input signal, such as amps, distortions, compressors, etc.
POD Farm 2 Advanced User Guide – Standalone Operation TIP: To feed one single input source (such as your guitar, plugged into your device’s Instrument jack) into both Tone paths, select “Same as Tone A” in the Tone B Source menu as shown above. This allows you to use the A/B Switch Box to feed into both Tones (see the following section)! Tone A & B Input Source Menus • Each Tone’s Input Source menu allows you to choose which of your Line 6 hardware’s inputs (Instrument, Mic 1, Line Stereo, etc.
POD Farm 2 Advanced User Guide – Standalone Operation Record Send Controls The controls in this section allow you to select the type of signal routed to POD Farm 2 Record Sends 1-2 & 3-4 (or Sends 9-10 & 11-12 for UX8 devices), and adjust Send output levels. You can think of the two Record Sends as “virtual pipelines” that each carry a stereo output signal from POD Farm 2, allowing you to select your POD Farm signals within your recording software as Input sources for recording into audio tracks.
POD Farm 2 Advanced User Guide – Standalone Operation Record Send Level Controls • Use the Level Fader to adjust the output of each Record Send. This is how you adjust the level of the signal that gets recorded into your audio software. *Note that the Record Send Source selection and Level controls do not affect the POD Farm 2 Tone A & B Monitoring signal (the signal you hear from your main analog & headphone outs of your Line 6 hardware).
POD Farm 2 Advanced User Guide – Standalone Operation Tuner View Click the Tuner button on the Main Control Bar to display the Tuner View and pluck a string on your guitar or bass to get in tune! Pitch Indicator “Flat” Indicator Arrow Reference Control Note Display Mute Switch The Tuner receives input from the Instrument input of your hardware, so if you are using a device other than a GX, D.I. or GuitarPort, be sure to select “Instrument” in the Mixer’s Tone A Input Source menu.
POD Farm 2 Advanced User Guide – Standalone Operation Configuring POD Farm 2 for MIDI Control You first need to configure the POD Farm 2 standalone application to receive MIDI communication from your connected MIDI controller device. Be sure to connect your MIDI controller to your computer before launching POD Farm 2, then make the following settings. • Launch the POD Farm 2 Preferences dialog and go to the MIDI tab.
POD Farm 2 Advanced User Guide – Standalone Operation Pre-configured MIDI Assignments As described on page 4•38 for POD Farm 2 Plug-In, the “pre-configured” MIDI control assignments are also available for most of the “POD Farm 2” Source Folder’s Tone Presets. The POD Farm 2 standalone application additionally includes several pre-configured “Global” MIDI assignments.
POD Farm 2 Advanced User Guide – Standalone Operation MIDI Control for Setlist and Preset Navigation Just like the POD Farm 2 Plug-In, the POD Farm 2 standalone application also offers the same options for using your external MIDI controller device to navigate through Setlists & their Tone Presets. Please see “MIDI Control for Setlist & Preset Navigation” on page 4•41.
POD Farm 2 Advanced User Guide – Standalone Operation Unlike POD Farm 2 Plug-In, there are no “MIDI” and “Automation” display buttons at the top left of the Assignments View within the POD Farm 2 standalone application. Parameter Automation is a feature offered only within the Plug-In and therefore, no Automation View display exists in the standalone application.
POD Farm 2 Advanced User Guide – Model Gallery Model Gallery About the Model Gallery.........................................................................7•3 Guitar Amp & Cab Models.......................................................................7•3 1964 Blackface ‘Lux ........................................................................................................ 7•3 Brit Gain 18...............................................................................................................
POD Farm 2 Advanced User Guide – Model Gallery Effects Models........................................................................................ 7•15 Delay.............................................................................................................................. 7•15 Analog Delay w/Modulation...................................................................... 7•16 Tube Echo...................................................................................................
POD Farm 2 Advanced User Guide – Model Gallery About the Model Gallery You probably know by now that we’re relentless tone fanatics here at Line 6. Once we’ve set our sights on creating a software emulation of a particular piece of gear, we go to great lengths to be sure that we’ve gotten our hands on the very best example of an amp, preamp, effect or speaker cabinet that we can find to study.
POD Farm 2 Advanced User Guide – Model Gallery o’clock position and the Presence knob to 0 for the classic Deluxe sound. Tweaked up right, this tone will cut through and sing. We jacked into Input 1 of the Vibrato Channel to get this model cooked up. * FENDER® and DELUXE REVERB® are registered trademarks of Fender Musical Instruments Corporation and are in no way associated or affiliated with Line 6.
POD Farm 2 Advanced User Guide – Model Gallery Citrus D-30 In 1968, in a little music store on Old Compton St. in London, Clifford Cooper was having trouble getting amplifier manufacturers to take him seriously as a dealer, as they thought he was too young, and his shop too small. So he did what seemed only logical to an enthusiastic young man with a background in electrical engineering – he designed and built his own amplifiers.
POD Farm 2 Advanced User Guide – Model Gallery 1987 Jazz Clean The 1987 Jazz Clean Amp Model is modeled after* the classic Roland® JC-120. This transistor amp was known for a strident clean sound and built-in stereo chorus. When using the JC-120 model, try cranking up the Treble for a shimmering clean sound that’ll cut through just about any mix. It’s also perfect for that 80’s “new wave” sound (after all, it was Andy Summers’ favorite amp with The Police).
POD Farm 2 Advanced User Guide – Model Gallery Line 6 Spinal Puppet You know how, when you’re playing head-bangin’ music, you look out into the audience and see all those heads bobbing up and down? Those are Spinal Puppets. Need we say more? p “Model Gallery” Line 6 Treadplate Looking for tight, high gain tone? The kind of sound that powers classic Metallica or Dream Theater tracks? Then you’ve come to the right place, my friend.
POD Farm 2 Advanced User Guide – Model Gallery of this era; a decade later Van Halen’s first two records owed their “brown sound” to a 100-watt Plexi (Our Super Lead, in fact, has the ‘lay down’ transformer that was unique to ‘68 models, the same as Hendrix and Van Halen’s Marshalls).
POD Farm 2 Advanced User Guide – Model Gallery While primarily known for its high gain personality, the SLO-100 has a great clean tone as well. Eric Clapton put Soldano on the map when he played Saturday Night Live with his Soldano SLO-100. * MARSHALL® is a registered trademark of Marshall Amplification PLC and is in no way associated or affiliated with Line 6.
POD Farm 2 Advanced User Guide – Model Gallery One of the interesting things about the Bassman® is just how interactive the Middle and Treble controls are. The Middle control isn’t a bandpass, as in most tone control setups. Instead, it’s almost like a second treble control. The two are additive, so if you’re running your Middle knob higher than halfway up with this model, you’ll find that the Treble control might give you more bright than you really want.
POD Farm 2 Advanced User Guide – Model Gallery 4x12 1x15 Guitar Cab Models - Based On: 1959 Tweed B-Man (based on Fender® Bassman® cab) 2001 Line 6 1967 Green 20s (based on Marshall® “Basket Weave” cab with Celestion® Greenbacks) 1968 Green 25s (based on Marshall® cab with Celestion® Greenbacks) 1978 Brit Celest T-75s (based on Marshall® cab with stock Celestion® T-75’s) 1996 Brit Celest V-30s (based on Marshall® cab with Celestion® Vintage 30’s) 2001 Treadplate (based on Mesa/Boogie® Dual Rectifier® cab)
POD Farm 2 Advanced User Guide – Model Gallery Flip Top The Flip Top model is based on* a 60’s Ampeg® B-15 Portaflex® — one of the most popular studio bass amps of all time. It’s tuned and front-ported, has a closed back, is 25 watts with a single 15-inch speaker, and set a new standard for cabinet and speaker efficiency, tone and convenience in bass amplification.
POD Farm 2 Advanced User Guide – Model Gallery reminds us of the theme music from Barney Miller, and all of those days practicing with the high-school jazz ensemble. Try playing a little of the Peter Gunn Theme... * All product names used in this document are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.
POD Farm 2 Advanced User Guide – Model Gallery Preamp Models American Classic This model is based on* an API 512 Mic Pre and API 550b EQ housed in an API Lunchbox 500 6-B. In 1967 API introduced the 512 as the first modular mic pre. Along for the ride also came the 550 EQ and together the modular components were housed in a 4 position rack complete with a handle — the “lunchbox.” This combination is responsible for many legendary recordings of the 60’s and 70’s.
POD Farm 2 Advanced User Guide – Model Gallery Lo-Fi Looking for something aggressive, trashy, or just plain interesting? Try the Lo-Fi! It gives you tones that are heavily band-passed (meaning there’s little low end or extreme high end), with lots of distortion available from the driver knob. You’ll find it’s just the thing when you want your vocals to sound like they came through a telephone, megaphone or toy microphone.
POD Farm 2 Advanced User Guide – Model Gallery echo will be versus the input signal, and allows Tap Tempo. A short delay time and low feedback setting will give you a classic “slap back” delay. Longer delay times give you a distinctly separate echo, and higher feedback settings increase the number of echoes. There’s always a MIX control, and each of the Models has a few other controls as well.
POD Farm 2 Advanced User Guide – Model Gallery Digital Delay This model is a straight up digital delay with Bass and Treble tone controls. Nothing fancy here, just basic echo-cho-cho-cho. After all, it’s good to cleanse the palate every once in a while. p “Model Gallery” Modulation Mod Effects are things that swoosh, pulse and warble — from phase shifters to flangers to choruses.
POD Farm 2 Advanced User Guide – Model Gallery * MXR® is a trademark of Applied Research and Technology, Inc. and is in no way associated or affiliated with Line 6. These product names, descriptions and images are provided for the sole purpose of identifying the specific products that were studied during the Line 6 sound model development. p “Model Gallery” U-Vibe The U-Vibe model is based on* the now-legendary Uni-Vibe, which was put on the map in 1969 by Jimi Hendrix.
POD Farm 2 Advanced User Guide – Model Gallery authentic kind of spin that a Leslie delivers, you’ll want to set the MIX knob to max, since a Leslie had no ‘dry’ path. * LESLIE® is a trademark of Suzuki Musical Instrument Manufacturing Co. Ltd. and is in no way associated or affiliated with Line 6. These product names, descriptions and images are provided for the sole purpose of identifying the specific products that were studied during the Line 6 sound model development.
POD Farm 2 Advanced User Guide – Model Gallery *All product names used in this document are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These product names, descriptions and images are used solely to identify the specific products whose tones and sounds were studied during the Line 6 sound model development. p “Model Gallery” Screamer From Stevie Ray Vaughan to Michael Landau, the simple Ibanez® Tube Screamer® is the overdrive heard ‘round the world.
POD Farm 2 Advanced User Guide – Model Gallery Bronze Master Originally designed for bass, but equally cool on guitar, the Maestro® Bass Brassmaster is considered by many to be the Holy Grail of bass distortion units, and ultra-rare bird designed in the early ‘70’s for Maestro® by synth genius Tom Oberheim. It showed up on Chris Squire’s gear list in a mid-70’s Yes tour program.
POD Farm 2 Advanced User Guide – Model Gallery Vetta Comp This effect is taken from the Vetta II, the Line 6 flagship guitar amplifier. A Line 6 original, Vetta Comp has a fixed ratio (2.35:1, in case you’re asking) with the threshold (that would be your SENS knob) adjustable from -9dB to -56dB and up to 12dB of gain available at the LEVEL knob. In other words, turn the SENS knob ‘til you like the way your signal’s compressed, then set the volume with LEVEL.
POD Farm 2 Advanced User Guide – Model Gallery Slap Plate This reverb dishes up the vibe of early rock and roll recordings, like Sam Phillips’ great work at Sun Studios. Thank you very much. p “Model Gallery” Wah The POD Farm 2 Wah effects simulate classic wah pedals, and can be used to provide a “parked wah” sound.
POD Farm 2 Advanced User Guide – Model Gallery using a Stomp effect, Amp Model or Preamp Model that adds a lot of distortion to your Tone, you’ll need to adjust the Noise Gate to work well with that, and you’ll probably have to tweak the Noise Gate if you change Models, change drive settings, or use different guitar(s), pickup configurations, or other changes to your input source, and the volume of audio that it’s providing.
POD Farm 2 Advanced User Guide – Model Gallery Model List To follow is a list of all Amp, Cab and Effects models that are included as “Factory-Standard” models for each Line 6 device supported by POD Farm 2/POD Farm 2 Plug-In, as well as included within each optional Model Pack. These models will appear within the POD Farm 2, POD Farm 2 Plug-In and POD Farm Elements Plug-Ins Gear View menus when the respective device is the one in use, and if the optional Model Packs are authorized for the Line 6 device.
1996 Mini Double n n 1960 Gibtone Expo n n 1960 Two-Tone n n n 1973 Hiway 100 n n n 1965 Plexi 45 n n n n n 1968 Plexi Lead 100 n 1968 Brit Plexi Bass 100 1968 Plexi Jump Lead n n n 1968 Plexi Variac’d n n 1969 Brit Plexi Lead 200 n 1990 Brit J-800 n n n n n 1996 Brit JM Pre n n n 1996 Match Chief n n n 1993 Match D-30 n n n n n 2001 Treadplate Dual n n n 2001 Cali Diamond Plate n 1985 Cali Crunch n n n n 1987 Jazz Clean n 1967 Wishbook Silver 1
Line 6 Fuzz n n Line 6 Chunk Chunk n n Line 6 Big Bottom n n Line 6 Treadplate n n n Line 6 Lunatic n n n Line 6 Agro n n n 2003 Connor 50 n 2003 Deity Crunch n 2003 Deity Lead n n 2003 Deity’s Son n n 1963 Blackface Vibro n n 1967 Double Show n n 1972 Silverface Bass n n 1987 Brit Gain Silver J n n 1992 Brit Gain J-900 Clean n n 1992 Brit Gain J-900 Dist n n 2003 Brit Gain J-2000 n n 2002 Mississippi Criminal n n Citrus D-30 n n n L6 Modern Hi Gain
Bass Expansion Pack FX Junkie Pack Collector Classics Pack Metal Shop Pack Power Pack PODXT Standard POD X3 & Platinum Bundle Model Name POD Studio, TonePort, GuitarPort & iLok Standard POD Farm 2 Advanced User Guide – Model Gallery Line 6 Sub Dub n n 1972 Amp 360 n n 2003 Jaguar n n 1975 Alchemist n n 1974 Rock Classic n n n 1968 Flip Top n n n 1998 Adam and Eve n n n n n n n n n n n 1973 Hiway 100 n n 1971 Hiway 200 n n 1969 British Major n n 1968 Brit Ba
1x12 2001 Line 6 n n n 1x12 1953 Small Tweed n n n 1x12 1964 Blackface ‘Lux n n n 1x12 1960 Class A-15 n n n 2x2 2001 Mini T n n n 2x12 2001 Line 6 n n n 2x12 1965 Blackface n n n 2x12 1996 Match Chief n n n 2x12 1987 Jazz Clean n n n 2x12 1967 Class A-30 n n n 4x10 2001 Line 6 n n n 4x10 1958 Tweed B-Man n n n 4x12 2001 Line 6 n n n 4x12 1967 Green 20s n n n 4x12 1968 Green 25s n n n 4x12 1978 Brit Celest T-75s n n n 4x12 1996 Brit Celest V-30
Bass Expansion Pack FX Junkie Pack Collector Classics Pack Metal Shop Pack Power Pack PODXT Standard POD X3 & Platinum Bundle Model Name POD Studio, TonePort, GuitarPort & iLok Standard POD Farm 2 Advanced User Guide – Model Gallery 2x15 California n n 2x15 Class A n n 4x10 Line 6 n n 4x10 Tweed n n 4x10 Adam and Eve n n n 4x10 Silvercone n n n 4x10 Session n n 4x12 Hiway n n 4x12 Green 2019s n n 4x12 Green 2519s n n 4x15 Big Boy n n n n n Noise Gate n n n
n n n Ping Pong Delay n n n Reverse Delay n n n Tape Echo n n Echo Platter n n Low Rez n n Phaze Eko n n Bubble Echo n n n Mods Sine Chorus (Mono) n n n Sine Chorus (Stereo) n n n n n Analog Chorus Line 6 Flanger (Mono) n n n Line 6 Flanger (Stereo) n n n n n Jet Flanger n n Phaser (Mono) n n n Phaser (Stereo) n n n U-Vibe n n n Opto Tremolo n n n n n n n Rotary Drum n n n Auto Pan n n n Lumpy Phase n n Stereo Square Chorus n
Sweeper n n Warble-Matic n n Stereo Expo Chorus n n Stereo Square Flange n n Reverbs ‘Lux Spring n n n n King Spring n n n Small Room n n n Tiled Room n n n n n n n n n Large Hall n n n Rich Chamber n n n Chamber n n n Standard Spring Brite Room n n Dark Hall Medium Hall n n n Cavernous n n n Slap Plate n n n Vintage Plate n n n Large Plate n n n n n Distortions Facial Fuzz n Tube Drive n n Fuzz Pi n n n Screamer n n n n
n n n Chrome n n n Chrome Custom n n n Throaty n n n Conductor n n n Colorful n n n Auto Wah n n n Synth Lead n n Synth String n n Synth Analog n n Synth FX n n Buzz Wave n n Rez Synth n n Saturn 5 Ring Mod n n Double Bass n n Synth Harmony n n Dingo Tron n n Clean Sweep n n Seismik Synth n n Vetta Wah Fassel Weeper n n Filters Sub Octaves n Bender n n n n n n EQ 4 Band SemiParametric EQ n 7•33 n Bass Expansion Pack n Wahs FX
POD Farm 2 Advanced User Guide – How To.... How To... Basic Operation........................................................................................8•2 How to Insert POD Farm 2 Plug-In on an audio track................................................... 8•2 How to switch Views (Gear, Panel, Presets)................................................................... 8•3 How to add models to a Tone .........................................................................................
POD Farm 2 Advanced User Guide – How To.... Basic Operation How to Insert POD Farm 2 Plug-In on an audio track You can load POD Farm 2 Plug-In (or any POD Farm Elements Plug-In) as an “Insert” effect on any audio, aux or bus track in your DAW host software to process any input fed into the audio track, or to process the playback of any audio clip within the audio track.
POD Farm 2 Advanced User Guide – How To.... How to switch Views (Gear, Panel, Presets) Use the 6 View Buttons on the Main Control Bar, at the top of the POD Farm 2 window, to switch between the displayed “Views.” The Gear View is where you can choose your Amp & Effects models to insert into your Tone paths. The Panel View is where you edit the Amp & Effects settings. And the Presets View offers a fully searchable “tree view” list of all the saved Tone Presets.
POD Farm 2 Advanced User Guide – How To.... How to edit Amp or Effects settings All POD Farm 2 amps and effects can be edited easily in the Panel View. Just click the Panel View button at the top left, and then click on any Amp or Effect model in your Signal Flow to display its Edit Panel. (In POD Farm Elements Plug-Ins the current amp or effect panel is shown at all times.) See “Panel View” on page 4•10. Panel View, displaying a Delay effect’s Edit Panel p Return to “How To...
POD Farm 2 Advanced User Guide – How To.... • Your keyboard’s up/down arrows will also select the next/previous item in the menu once you’ve previously selected an item within the menu. p Return to “How To...” contents How to use the Tuner Click the Tuner View button on the POD Farm 2 Main Control Bar to display the Tuner. Or, insert the Elements “POD Farm Tuner” Plug-In on your DAW audio track.
POD Farm 2 Advanced User Guide – How To....
POD Farm 2 Advanced User Guide – How To.... Main Control Bar - You can also use the handy Preset menu at the top of the POD Farm 2 window. Note that this menu always shows the contents of the currently selected Source folder or Setlist (the folder or Setlist that you see selected in the left pane of the Presets View).
POD Farm 2 Advanced User Guide – How To.... How to Save a Tone Once you’ve edited a Tone preset, or created a new one, you’ll of course need to Save it on your computer as an “.l6t” file to be able to recall it again later in POD Farm 2 standalone or Plug-In.
POD Farm 2 Advanced User Guide – How To.... If doing a Save As, in the Save Tone As dialog you’ll be able to name the Tone, and optionally choose the location where to save it on your computer. Note: By default, Tone Presets are saved to the assigned POD Farm 2 Tone folder. The POD Farm 2 Presets View is already configured to list all Tones stored in this directory.
POD Farm 2 Advanced User Guide – How To.... Note that only the POD Farm 1 & 2 and POD X3 target formats support Dual Tone presets - therefore, if saving a Dual Tone preset, only these three formats are offered in the Target menu. p Return to “How To...” contents How to switch to Dual Tone mode One of the most powerful features offered in POD Farm 2 is the ability to create a Dual Tone configuration.
POD Farm 2 Advanced User Guide – How To.... Hardware Setup How to select hardware for POD Farm 2 to use The POD Farm 2 software was designed for the new POD Studio line of Line 6 USB audio interfaces. However, POD Farm 2 can also be used with any TonePort or GuitarPort device as well. Further, a POD Farm 2 Plug-In license can be purchased as an “Add-On” and authorized on POD X3 and PODxt devices, as well as iLok USB key devices.
POD Farm 2 Advanced User Guide – How To.... Obviously, you’ll first want to make sure your Line 6 or iLok device is properly connected to the USB port of your computer and powered on.* If not, exit POD Farm 2, connect the device and try again. *Note: It is specifically recommended to always connect a Line 6 USB device directly to your computer’s USB port, and not into a USB hub. USB hubs can sometimes cause communication errors with USB audio devices.
POD Farm 2 Advanced User Guide – How To.... How to connect your Hardware to a guitar amp We get this one a lot! Many Line 6 users want to know how to physically connect their hardware to a guitar amp, because they think it will sound better that way.
POD Farm 2 Advanced User Guide – How To.... Each DAW application offers these MIDI input options slightly differently. For most DAWs, this is typically accomplished by setting up a MIDI track to receive from your MIDI controller device, and setting the MIDI track Output to the audio track & Plug-In.
POD Farm 2 Advanced User Guide – How To.... How to register your Line 6 hardware purchase You may be required to register your line 6 hardware to allow some Add-Ons to be properly authorized on the device. It is also important to register your Line 6 hardware so that you can obtain customer support and stay informed about the latest new products and Add-Ons. Visit the Line 6 web site Support section and select the Register Gear option there.
POD Farm 2 Advanced User Guide – How To.... How to transfer Model Packs & POD Farm 2 Plug-In licenses If you own more than one Line 6 USB device and have purchased any optional Add-Ons (Model Packs, GearBox Plug-In, POD Farm 2, etc.), then it is possible to utilize your online Line 6 account and Line 6 Monkey to transfer these Add-On licenses from one Line 6 device to another. Please see “Transferring POD Farm 2 & Add-On Licenses” on page 1•6. p Return to “How To...
POD Farm 2 Advanced User Guide – Troubleshooting Troubleshooting Audio Glitches................................................................................................................ 9•2 Why can’t I hear the effects?........................................................................................... 9•4 Why can’t I launch POD Farm 2 in Standalone Operation?.......................................... 9•4 The Line 6 device Audio Driver cannot be found...........................................
POD Farm 2 Advanced User Guide – Troubleshooting Audio Glitches Audible pops and clicks and other audio glitches may occur when another program or device is trying to stream audio or video, or if your computer cannot provide enough system resources (RAM memory, or hard disk or computer processor speed) for POD Farm™ 2. There can be many different causes for this type of problem, since there are so many possible computer models, parts, and configurations.
POD Farm 2 Advanced User Guide – Troubleshooting On Mac® systems, Line 6 devices utilize the Mac® Core Audio driver system and these audio driver settings are all handled by the Mac® Operating System’s Audio-MIDI Setup dialog. This dialog does not offer buffer settings for the Core Audio driver. However, some DAW applications do offer their own audio buffer settings (usually found in the DAW’s Preferences or Audio Setup options).
POD Farm 2 Advanced User Guide – Troubleshooting Why can’t I hear the effects? Are any models disabled (bypassed)? Each individual effect and amp/preamp can be disabled independently by clicking on the Enable/Disable button found within its Edit Panel, or found above the model’s icon in the Signal Flow View. A disabled model appears dimmed within the Signal Flow View.
POD Farm 2 Advanced User Guide – Troubleshooting The Line 6 device Audio Driver cannot be found When your computer does not automatically detect your Line 6 device on startup, (assuming you didn’t forget to plug in the USB cable or power it on), it means that one of the Line 6 device driver files may be missing or corrupted. Download the latest POD Farm 2 installer directly from the Line 6 Software Downloads page and run it to install POD Farm 2 and the latest device drivers.
POD Farm 2 Advanced User Guide – Troubleshooting Mixer Tone A & B Faders - A volume “fader” and meter is also available for each Tone A and Tone B in the Mixer View. You’ll want to make sure these are turned up to show a healthy output level on the meters. Tone A & B Faders and Meters Note that when using POD Farm 2 in standalone operation, the Tone A & B faders control the monitor signal levels only, and the Record Send faders control the levels sent to your DAW application as its recording input level.
POD Farm 2 Advanced User Guide – Troubleshooting Multiple computers: Using POD Farm 2 on more than one computer You can install and use POD Farm 2 with more than one computer if you like. You may need to Authorize your Line 6 device on the new computer the first time you go to use POD Farm 2 Plug-In or to run in standalone operation. It’s a simple process really! Just connect your Line 6 hardware to the computer you’d like to use and run Line 6 Monkey - please check the Start Here chapter for more info.
POD Farm 2 Advanced User Guide – Troubleshooting • Is the guitar input working with your Line 6 hardware? – The LED light on the GuitarPort hardware also acts as an input level indicator, flashing orange when medium volume sound is being received at the guitar connector, and red when the maximum level is reached.
POD Farm 2 Advanced User Guide – Troubleshooting Causes of excess noise or unwanted distortion and clipping Noise and distortion? That’s what electric guitar is all about, right!? But if you’re hearing the bad kind of noise or distortion from POD Farm 2, there are several possible sources and solutions, including the POD Farm 2 amp, Tone and Monitor volume knob settings, sound card noise, guitar noise, and speaker or audio system noise.
POD Farm 2 Advanced User Guide – Troubleshooting TonePort UX8 and all POD X3 family devices require a USB 2.0 connection, all other Line 6 devices operate at USB 1.1 and can connect to either a USB 1.1 or USB 2.0 connection. TonePort UX8 does not reconnect after Windows® goes into standby When Windows® goes into standby mode or hibernation, the UX8 may not come back online. Toggle the power switch to reconnect the unit to the driver.
POD Farm 2 Advanced User Guide – Troubleshooting iLok USB Issues If you are using the POD Farm 2 Plug-In for iLok, and you have your iLok correctly connected to your USB port, but POD Farm 2 Plug-In is displaying a “not authorized” error, check the following: • Is the LED on the iLok key lit? If not, then the iLok USB key may either not be inserted or installed correctly. Try exiting all audio software, then remove and reinsert the iLok key, or try it in a different USB port. • Go to iLok.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What Is… What are the Amp, Cab, Preamp and Effect Models?.................................................. 10•3 What are the Amp Model and Cab Model controls in Panel View?............................ 10•3 What is ASIO® ?............................................................................................................ 10•4 What is the Assignments View?....................................................................................
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is ToneDirect™ Monitoring?............................................................................ 10•22 What is a Tone Preset?................................................................................................. 10•22 What is Tremolo?......................................................................................................... 10•22 What is a USB hub?.....................................................................
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What are the Amp, Cab, Preamp and Effect Models? Line 6 pioneered the use of modeling technology for guitarists with the world’s first “modeling” guitar amp. Since then, all Line 6 products have included Models developed through extensive, meticulous studies of guitar, bass and pro audio equipment heralded for its classic tone qualities.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) Room % Value Cabinet Model Menu Cab Bypass Button Cab View Button Mic Model Menu Cab Edit Panel These control functions are covered in detail in the “Panel View” on page 4•10 .
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is the Assignments View? The Assignments View displays all MIDI Control assignments, and (in POD Farm 2 Plug-In only) all active Automation assignments. POD Farm 2 standalone application and plug-in both support the ability to be controlled remotely by a MIDI controller device - where you can “map” any individual knob, pedal or switch from your MIDI controller hardware to one of the numerous POD Farm 2 parameters to create a MIDI “assignment.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Compressor? Compressor is one of the POD Farm 2 & Elements “Dynamics” Effects models. Compressors even out audio signals by reducing the volume of the loudest sounds to better match the volume of quieter sounds. You can use subtle compression to make your instrument playing sound more even, or drastic compression for dramatically increased sustain and a very consistent level.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) GarageBand. These software applications vary in features, complexity and price, so there is certainly one out there just right for you (talent not included).
POD Farm 2 Advanced User Guide – Glossary (What Is...?) “slapback” delay (great for that Rockabilly thing). Longer delay TIME gives you a distinctly separate echo, and a higher FEEDBACK setting increases the number of echo repeats.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Dual Tone mode? One of the most powerful features of POD Farm 2 is the ability to process not one, but two completely independent signal paths! This allows you to apply POD Farm 2 Plug-In on one guitar track, for example, and have it run through two separate amps, cabs & mics - each with their own sets of effects! You can switch between Single Tone mode and Dual Tone mode via the Dual button on the Main Control Bar.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is the Enable/Disable (bypass) button? All amp & effects models include their own “Enable/Disable” button, which you’ll see at the top left of the model’s Edit Panel, as well as within the Signal Flow View whenever you hover your mouse over a model icon. Disabling turns the amp/effect model’s processing “off”, yet still allows the signal to pass through it unprocessed.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is a Flanger? Flanger is one of the types of effects within the POD Farm 2 “Mods” (Modulation) effect category, as well as within the Elements POD Farm Mods Plug-In. The Flanger’s sound is most famously known as the “jet-plane” whoosh effect of several classic 70’s recordings. It can also be used to give a “swooshy” or “swept” sound to guitar, or just to create a “bigger” sound.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) With the System Tempo’s Host Sync option active,* the Plug-In’s tempo value follows the tempo of the current host software project. With Host Sync off, the System Tempo is set either by dragging the BPM number up/down, or by using the Tap Tempo button.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) Hot Key Assignments Command - Action Windows® Mac® File-New Ctrl + N zN File-Open Ctrl + O zO File-Tone-Save Ctrl + S zS File-Tone-Save As... Ctrl + Shift + S zS File-Tone Info... Ctrl + I zI File-Tone-Recent Ctrl + [0 - 9] z [ 0 - 9] Help-Open Help F1 z? Main Menu Commands POD Farm 2 - Preferences...
POD Farm 2 Advanced User Guide – Glossary (What Is...?) 2 Plug-In on any computer. It is also easy to manage all your iLok software licenses with iLok.com where you can set up a secure account, view all licenses on your iLok key, take delivery of new licenses, and even move them between multiple iLok keys! Please see “POD Farm 2 Plug-In for iLok” on page 1•7 for more info.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Modulation (or Mods)? Modulation (abbreviated as “Mods”), is one of the categories of effects models found in POD Farm 2 and POD Farm Elements Plug-Ins. The Mods effects model menu in POD Farm 2 and in the Elements POD Farm Mods Plug-In, lists effects that incorporate pitch and/or volume modulation, such as Chorus, Flanger, Tremolo, etc.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) Go to the “About POD Farm” dialog and you’ll see the Model Packs authorized for your connected device listed at the bottom right of the window. Or, just launch Line 6 Monkey, and the Optional AddOns tab will show you which Model Packs and other goodies are just a few clicks away (well, a few clicks and a credit card number anyway). For more info, please check out the Model Pack Handbooks.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Parameter Automation? Most audio plug-ins are “automatable” from within your audio host software - meaning, adjustments of the Plug-In parameters (e.g. - wah pedal position, delay mix level, stomp on/off, etc.) can either recorded in real-time by the host software, or manually adjusted over time with editable envelopes right on the track where the Plug-In is inserted.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Re-Amping Re-amping is the process by which you can record a completely dry, unprocessed signal to your DAW project’s audio track, while monitoring an amp/fx processed tone, and then route the recorded dry audio back through an amp to apply this sound on the track later.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) Note: If you have a POD X3 or PODxt device, they offer their own internal options for what to route out their Record Sends (Unprocessed, Semi-Processed or Processed) - these options are found in the Outputs section of the POD onboard settings. p Return to “What Is…” contents What is the Reference control in the Tuner? This control is available within the Tuner View of POD Farm 2, as well as in the Elements Tuner PlugIn.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Reverb (Verb)? Reverb (sometimes referred to as “verb” in audio engineer speak), is one of the effects categories included in POD Farm 2 and Elements Plug-Ins.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is the Signal Flow View? The bottom of the POD Farm 2 window is what we call the Signal Flow View (SFV), and it displays the chain of models making up the current Single or Dual Tone paths. To edit any model’s settings, just double-click directly on the model within the SFV and its Edit Panel will be displayed in the upper Panel View window.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Tap Tempo? Please see “What are the FX Time/FX Speed controls?” on page 10•11. p Return to “What Is…” contents What is ToneDirect™ Monitoring? Available within POD Farm 2 when run in standalone operation, ToneDirect™ Monitoring is a unique feature of your Line 6 hardware which feeds your POD Farm 2 tones directly out the Line 6 hardware’s outputs (rather than strictly into your computer software).
POD Farm 2 Advanced User Guide – Glossary (What Is...?) Tremolo is one of the types Modulation Effects included within POD Farm 2 and Elements Plug-Ins “Mods” effects menus. Tremolo produces a pulsing sound, and based on that astonishing effect built into yester-year’s tube amps. It works by turning the volume of your input down and back up again repeatedly, at the rate set via the SPEED knob. Many of the effects are modeled after classic gear described in the “Model Gallery”.
POD Farm 2 Advanced User Guide – Glossary (What Is...?) What is Windows® 64 Bit? Microsoft offers several “flavors” of the Windows® operating system for PCs, and the most common ones for every-day computer folks these days are the Windows® XP. Windows Vista® and Windows® 7 “32 bit” operating systems. These are designed for running most all popular PC hardware and software, including all Line 6 USB hardware and software products.
POD Farm 2 Advanced User Guide – Online Resources Online Resources Hungry for more info? We’ve got plenty of helpful resources just a click away.
