Owner's Manual
POD Farm 2 Advanced User Guide – Troubleshooting
9•11
iLok USB Issues
If you are using the POD Farm 2 Plug-In for iLok, and you have your iLok correctly connected to your
USB port, but POD Farm 2 Plug-In is displaying a “not authorized” error, check the following:
• Is the LED on the iLok key lit? If not, then the iLok USB key may either not be inserted or
installed correctly. Try exiting all audio software, then remove and reinsert the iLok key, or try
it in a different USB port.
• Go to iLok.com, log in to your iLok account and check that the POD Farm 2 license is correctly
installed on your iLok key.
• Check to see if there is an updated driver for the iLok USB key at iLok.com - if so, install the
new driver following their instructions.
• You can nd the details for your purchased POD Farm 2 Plug-In for iLok on your Line 6 account
as well. For instructions on purchasing the POD Farm 2 for iLok license and conguration, please
see “POD Farm 2 Plug-In for iLok” on page 1•7.
p Return to “Troubleshooting” Contents
Warranty, Customer Service and Repair Information
Before contacting the Line 6 Customer Service team, please take the time to visit the Line 6 Support
site and the searchable Line 6 Knowledgebase system which is often the fastest and easiest way to get
answers. There are also several documents posted on the POD Farm Online Help section of the Line
6 web site – please visit the site for the most up to date information on your Line 6 gear and warranty
and service information.