Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•29
Tone A
Tone B
Signal Flow View - Dual Tone Mode
Model Controls & Context Menu Options
Model Controls - Hovering over a model icon within the SFV displays an Enable/Disable button as
well as the name of the model. Use the Enable/Disable button to bypass the model, allowing your
signal to flow through it unprocessed. The model icon appears transparent when disabled.
Enable/Disable Button
Model Name
Enabled Model Disabled Model
TIP: When a Guitar or Bass amp model is disabled, its Cab and Mic model remain active. This allows
you to still have the speaker and mic emulation added to your signal. The Cab and Mic models can be
independently enabled/disabled in the Cab View panel.
Model Context Menu - Right click (Windows
®
) or Ctrl+click (Mac
®
) directly on any amp, preamp or
effect model’s icon within the SFV to bring up its context menu.
Model Context Menu
• Bypass - Bypass the model’s processing (you’ll see this toggles the Enable/Disable button state,
as described above).
• Delete - Remove the model from your Tone. (You can alternatively drag any model icon out of
the SFV area to delete the model - see “Deleting Models from your Tone” on page 4•32).
• Replace - The contents of the model’s Gear category menu is conveniently displayed here so that
you can easily replace the current model with another of the same model type.