Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•41
TIP: Many DAW applications additionally offer their own MIDI Learn capabilities, where DAW parameters
and Plug-In parameters can be accessed directly within the DAW’s user interface. POD Farm 2 Plug-In
parameters can typically be accessed this way for MIDI Control as well - see your DAW’s documentation!
Minimum and Maximum Position Values
By default, all variable parameters (knobs, sliders, faders, etc.) are congured with a Minimum position
of 0% and a Maximum position of 100%, to provide the full range of the parameter via MIDI remote
control. However, in some cases you might want to customize a parameter, such as the Wah effect’s
Position knob, for example, so that its Min. or Max. is more limited. This would allow you to move
your controller’s Pedal for the full throw yet limit the Wah effect to a more narrow sweep. To customize
these Min. & Max. values for a parameter:
Load the desired Amp or Effect model in the POD Farm 2 Plug-In Panel View.
Set the desired knob, fader or slider to the value you want as the new minimum position.
Right click (Windows
®
) or Ctrl+click (Mac
®
) on the knob/fader/slider and choose MIDI Control
> Set min to current pos.
The parameter minimum position is now customized! To customize the maximum position for a
parameter, follow the above steps and choose Set max to current pos.
TIP: You can also utilize these Min and Max options to “reverse” the parameter’s control behavior. For
example, set the Min to 100% and the Max to 0%, and a MIDI pedal or knob mapped to the parameter will
decrease the parameter value when turned “up”! (Ever wanted to work a Wah or Pitch Bender in reverse?)
MIDI Control for Setlist & Preset Navigation
POD Farm 2 also offers a few options for using your external MIDI controller device to navigate
through Setlists & their Tone Presets.
Previous/Next Preset buttons
Preset “Program” numbers (for
Presets within Setlists)
Previous/Next Setlist buttons
Setlist “Bank” numbers
Presets View - MIDI Control for Setlists