Owner's Manual

POD Farm 2 Advanced User Guide – POD Farm Elements Plug-Ins

5•2

*Note: The POD Farm Tuner Plug-In does not include the Main Control Bar Input & Output Controls

or Model Menu.

• Input Control - Use the knob and meters here to optimize the audio signal fed into the Plug-In.*

The “colorized” stereo level meters provide the following input level information:

• The green to yellow range of the meters indicates up to -18 dB (instrument level).

• The yellow range of the meters indicates from -18 dB to 0 dB (full scale).

• The red “clip indicators” light up if the input exceeds 0 dB. Clipping should always be

avoided!

• If there is a mono input source, then only one meter is shown.

*Important! Setting your input level in the Elements Plug-Ins is critical for optimizing your audio signal

quality. Here are some helpful tips for conﬁguring Input levels:

• Some models are calibrated to receive an “instrument level” audio signal (-18 dB). Therefore,

when using any of these models, it is best to adjust the Plug-In’s Input Control knob so that

the Input meters remain in the higher end of the green range. These “instrument level” models

include all those in the following Elements Plug-Ins:

• POD Farm Guitar Amps

• POD Farm Bass Amps

• POD Farm Distortions

• POD Farm Filters

• POD Farm Dynamics (excluding the “Compressor “ model, which receives up to full scale

input)

• When using any of the Elements Plug-Ins other than the ones mentioned above, the Plug-In’s

Input level can be set up to full scale.

• Elements Plug-In Name - Each Elements Plug-In displays its name here.

• Master Output Level Control and Meters - Use the knob and meter here to optimize the audio

signal from the Plug-In fed back to the host (post Plug-In processing).

• The knob provides level adjustment up to +18 dB of gain - for unity gain, set knob to the

dot, as shown (or just double click on the knob to “reset” to unity).

• Stereo level meters provide peak display with clip indicators.

• About Box button - Click here to launch the About box and get the details about the POD

Farm Elements & software version numbers and the authorized Line 6 device, iLok hardware &

Add-On Model Packs in use.

Elements Plug-In About Box