Owner's Manual

POD Farm 2 Advanced User Guide – Start Here
1•12
Windows
®
users - When you see the Choose Hardware Type screen during the POD Farm 2
installation, be sure to check the box for “POD Farm 2 for iLok.” If you are also going to be using
any Line 6 USB audio device (POD Studio, TonePort, POD X3, PODxt or GuitarPort) then you’ll
want to check the “POD Farm 2 for Line 6 Devices” box as well:
Mac
®
Users - The POD Farm 2 installer’s default settings will install the necessary POD Farm 2 &
Elements les for your iLok, and will additionally install the applications and audio drivers for any
Line 6 USB audio devices automatically.
Windows
®
& Mac
®
Users - If desired, you can uncheck any individual POD Farm 2 and Elements
Plug-In formats that you may not need. But you will need to install at least one POD Farm 2 and
Elements Plug-In format supported by your host audio software so that you will be able to use these
Plug-Ins:
Windows
®
- Plug-In Format Options
Mac
®
- Plug-In Format Options
With the above steps completed, you’ll be able to access and utilize POD Farm 2 Plug-In in your host
audio software! You are, of course, free to use any type of audio interface with your DAW conguration.
Please see the “POD Farm™ 2 Plug-In” chapter for more info.
Note that to run POD Farm 2 in standalone operation, it is required to have an authorized Line 6 POD
Studio, TonePort or GuitarPort USB audio interface.