Owner's Manual

POD Farm 2 Advanced User Guide – How To....
8•7
Main Control Bar - You can also use the handy Preset menu at the top of the POD Farm 2 window.
Note that this menu always shows the contents of the currently selected Source folder or Setlist (the
folder or Setlist that you see selected in the left pane of the Presets View).
Tone Preset Menu
Tone New/Open/Save Options
Next/Prev Preset Buttons
Tone Preset controls on the Main Control Bar
Tone - Open command - Click on the little folder icon on the Main Control Bar and choose Open.
This allows you to browse your entire computer and load any POD Farm 2-supported Tone Preset le.
File > Open (standalone operation only) - Go to the POD Farm 2 standalone application’s File menu
and select Open to do the same as the above. You can also drag one of your .l6t preset les from one of
you Operating System windows directly into the POD Farm 2 application window to load the preset.
p Return to “How To...” contents
How to create a New (empty) Tone
Sometimes you just want to start from scratch, and create your own sonic masterpiece from the ground
up. You can do this by clicking the little folder icon on the Main Control Bar and selecting New.
This loads a fresh, new Tone with no models loaded at all. Note that the type of new Tone created
(Single versus Dual) is determined by the type of Tone you currently have loaded - if you currently
have a Single Tone conguration, the new Tone will be an empty Single Tone. Since this is a totally
new Tone, you’ll want to Save it (probably with a more clever name than “New Tone”) to recall it
again in the future.
p Return to “How To...” contents