Owner's Manual

POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware
2•11
Power Button
When the power button is engaged, the UX8 main LEDs will illuminate. UX8 is not USB powered and
receives no power from the computer.
LED status indicators
The Main Mute and Main Clip LEDs provide secondary functions in their ability to indicate the
connection status of USB and S/PDIF, as follows:
• No USB connection - The main clip LEDs alternate steadily between left and right, about once
every second. The USB cable may be unplugged or the UX8 Line 6 audio driver may not be
installed on your computer.
The Line 6 audio driver is installed with the POD Farm 2 application installer - or you can launch Line 6
Monkey and go to the Updates tab to check for and install the latest driver version.
• No S/PDIF clock sync - The Mute LED blinks 3 times rapidly about once every second when the
clock mode set to S/PDIF, and no external clock is present.
KB37
Connect any line
level input source for
monitoring to the
Stereo Monitor In
Connect any line level input
source that you want to
record into the Line Inputs
Instrument Input -
Connect your electric
Guitar or Bass
Connect up to two footswitches to
send MIDI control messages
Connect the Analog Outs
to your audio monitors
Connect your USB cable
from your computer’s USB
port
Connect
your stereo
Headphones
Connect up to two
Microphones
Connect to the S/PDIF input
of an external device to send
your KB37 output digitally
Connect an
Expression Pedal to
send MIDI Control
messages