Owner's Manual

POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware
2•14
Analog Outputs - These Left and Right 1/4 inch jacks are your main outputs and carry all the audio
from TonePort D.I. - The audio from your audio software on the computer, and anything plugged into
the D.I. Instrument input. These are what you want to connect to your powered speakers or monitoring
system if you are using TonePort D.I. as your primary audio interface for your recording software. If you
are using a 3rd-party audio interface, these outputs supply the ToneDirect™ magic to your interface
or mixer, when using the POD Farm 2 standalone application alongside your DAW with POD Farm 2
Plug-In inserted. See the “ToneDirect™ Monitoring” section for more details.
GuitarPort
Instrument Input - To connect your electric guitar or bass, plug it into this input. When using POD
Farm 2 in standalone operation, this connection routes the instrument’s signal into POD Farm 2,
where you can choose your Tone, and then route the processed signal to the Record Sends (to your
audio software) and to the Analog Line Outs.
Analog Line Outs – connect to your
powered speakers or mixer
Connect your stereo headphones
Connect USB cable from here to your
computer
Monitor In – connect a line level, stereo
output (from your stereo, MP3 player,
etc)
Analog Line Outs - These Left and Right RCA jacks output all audio signals - The audio from your
DAW, and anything plugged into any of the Instrument or Monitor inputs. So, these are what you
want to connect to your monitoring system when using GuitarPort as your computer’s sound card. Use
shielded RCA to RCA tipped cables to connect directly to your powered speakers, mixer or power amp
setup. Note that you can also use the headphone jack on GuitarPort if you want to use headphones for
monitoring.
Headphones - If you want to listen using stereo headphones, plug them into this 1/8 inch stereo jack.
This Headphone jack outputs the same signal fed to the Analog Line Outs - The audio from your audio
software on the computer, as well as anything plugged into the Instrument or Line inputs.