Owner's Manual
POD Farm 2 Advanced User Guide – Driver Panel & Recording
3•5
Inputs & Recording Tab - Windows
Input Source Menu: This allows the user to select which physical input “source” is used on the Line 6
USB hardware (Mic 1, Instrument, etc.) Note that this menu is ONLY selectable when the POD Farm
2 standalone software is not in use by the Line 6 hardware. When POD Farm 2 is in use, this selector
remains grayed out, but displays the current Source that is selected within POD Farm 2 standalone.
When POD Farm 2 standalone is not in use by the selected Line 6 device, this Input Source menu
offers a list of input options. These options differ, depending on your specic Line 6 device.
For UX2 & KB37 devices
only - Choose what signal
your device’s VU Meters
measure
GX, D.I. and GuitarPort are always “xed” to only route their “instrument” 1 /4 inch input signal
into POD Farm 2 standalone.
PODxt & POD X3 devices do not offer an Input Source menu in this dialog.
TonePort UX8 has a larger set of options - see “Inputs & Recording Tab (TonePort UX8 only -
Windows®)” on page 3•7.
Record Sends Info box: One line for each Record Send appears here along with a general description for
the signal each Send is carrying. Refer to your specic Line 6 device type in the following descriptions.
Note that multiple Sends for your Line 6 device are only available when using the ASIO driver
in your recording software. If your recording software is configured to access the device via its
WDM® or DirectSound® driver, then only one Send will be available in the recording software
(Send 1-2).