Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•11
Amp Bypass Button Amp View Button Amp Model Menu Cab View Button
Amp Edit Panel
Amp Bypass Button - Press to bypass the Amp model processing and hear the dry, unprocessed sound.
(Note that this bypasses the current Amp, Cab and Mic models).
Amp & Cab View Buttons - Press to toggle between displaying the Amp or the Cab View. (If you have
a preamp in use, rather than a guitar or bass amp, you won’t see these Amp/Cab buttons.)
Amp Model Menu - The current model name is displayed. Click the downward arrow to display and
select from a list of available amp models, or to replace out the current Tone’s amp model.
Cabinet View
From the Amp View, pressing the Cab button displays the Cabinet View. You’ll see that whenever you
load a guitar or bass amp model, a default speaker cabinet is pre-selected to match. In the case where
the selected amp is a “combo” amp, this same combo enclosure is what you will see as the default in
the Cab View. When the current amp in use is a “head”, then you’ll see a separate cab as the “Default
Cab” in the Cab View. But you are certainly not limited to using the Default speaker cabinet! You can
use the options in the Cab View to select a different “Custom” guitar or bass speaker cabinet, change
the positioning of the cabinet in the room, and select from among four different microphone models.
Cab Bypass Button Mic Model Menu
Room % Value Cabinet Model Menu Cab View Button
Cab Edit Panel