Owner's Manual
POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•31
Guitar and Bass Amps in the Signal Flow View
There are several options for matching amps with speaker cabinets in POD Farm 2, therefore, you’ll
see your loaded Amp + Cab displayed in the Signal Flow View differently, depending on your selection
(also see “Cabinet View” on page 4•11). You’ll see a microphone icon placed in front of the active speaker
cabinet in each Tone - note that the Mic icon and angle shown reect the specic Mic model options
selected as well. To follow are the different Amp/Cab/Mic SFV display scenarios.
• When a Combo Amp with its Default Cab option is loaded, you’ll see the Combo, with the Mic
icon in front:
Combo Amp Model - with Default Cab
• When a Combo Amp and a “Custom” Cab is loaded, you’ll see the Cab displayed as a separate
Model, placed to the right of the Combo. The Mic is shown in front of the Custom Cab to
indicate this is the Cab you are hearing:
Combo Amp Model - with Custom Cab
• When an Amp “Head” Model is in use, a separate Cab is displayed immediately to its right
(whether the Cab is the Default or a Custom Cab). The Mic is shown in front of the Cab to
indicate you are hearing the signal through this Cab:
Amp “Head” Model - with Default or Custom Cab
• When an Amp with “No Cabinet” selected is loaded, you’ll see only the Amp (Combo or Head),
with no Cab or Mic, indicating that you are hearing a “direct” signal out of the amp, with no
speaker cabinet modeling applied:
Amp with “No Cabinet” option selected (Combo or Head) - no Cab or Mic is displayed