Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•43
In addition to the 32 assignable Automation Slots, POD Farm 2 Plug-In also presents several additional
“xed” parameters within your DAW host’s parameter menu, regardless of the loaded POD Farm 2
Tone Preset. Where POD Farm 2 Plug-In is inserted on any DAW track, this total list of parameters
appears in your DAW’s track automation parameter menu as follows:
POD Farm 2 Plug-In Parameter List
Parameter Type Parameter Name Parameter Description
Assignable Knob Parameters Knob: 1 thru Knob: 16 Each can be assigned to any supported
variable parameter
Assignable Switch Parameters Sw: 1 thru Sw: 16 Each can be assigned to any supported
on/off parameter
Fixed Parameters Master Input Plug-In Input Volume
Master Output Plug-In Output Volume
Tone A Level Tone A Output Level
Tone B Level Tone B Output Level
Tone A Balance Tone A Output Panning
Tone B Balance Tone B Output Panning
Tone A Mute Tone A Output Mute
Tone B Mute Tone B Output Mute
Assigning Parameters to Automation Slots
To assign a POD Farm 2 Plug-In amp, preamp or effect parameter to an Automation Slot:
Load the desired Amp, Preamp or Effect model into the POD Farm 2 Panel View.
Right click (Windows
®
) or Ctrl+click (Mac
®
) directly on the desired POD Farm 2 knob or
switch control to bring up the Automation menu. The menu displays a list of 16 Knob or Switch
Automation Slots (pertaining to the type of control you’ve selected). Initially, these Slots are all
empty (un-assigned to any parameter).
Click within any Slot to “assign” the chosen control. Note that clicking in an occupied Slot will
overwrite an existing assignment with your new control assignment.
Right click (Windows
®
)
or Ctrl+click (Mac
®
)
directly on the desired
knob or switch
control to access the
Automation menu
An arrow at the left
of the slot number
indicates the “selected”
slot. Clicking Clear in
the menu will remove
the selected Slot as-
signment.
POD Farm 2 Plug-In - assigning a knob parameter to an Automation Slot