Owner's Manual

POD Farm 2 Advanced User Guide – Driver Panel & Recording
3•4
In Sound panel’s Playback tab you can designate your Line 6 USB device as the “Default” audio device
(see “Setting Windows® to use your Line 6 hardware as the Default Audio Device” on page 2•33).
The Sound Control Panel dialog - Playback tab
You can also click on the Properties button and access the default format setting for the Sample Rate
and Bit Depth for your Line 6 device when used with Windows
®
multimedia applications. (Note that
if you are using an audio application that is set to utilize the ASIO driver for your Line 6 device, then
ASIO communicates directly with the device, and these Windows
®
“default format” settings do not
apply.)
11 – ToneDirect - USB Audio Streaming Buffer Size: This slider adjusts the buffer size for the
audio responsiveness of the ToneDirect Monitoring signal. Basically, the default setting should be ne
for most systems, but if getting audio dropouts or working with large CPU demands on your system,
raise the slider a notch or two to the right until it alleviates the problem. Please see “ToneDirect™
Monitoring” on page 2•30 for more details.