Owner's Manual

POD Farm 2 Advanced User Guide – Driver Panel & Recording
3•8
The Inputs & Recording tab lets you select specic inputs for recording. Input Source options are as
follows:
Input 1: Instrument 1 or XLR 1 or Line 1 or S/PDIF (L)
Input 2: Instrument 2 or XLR 2 or Line 2 or S/PDIF (R)
Input 3: XLR 3 or Line 3
Input 4: XLR 4 or Line 4
Input 5: XLR 5 or Line 5
Input 6: XLR 6 or Line 6
Input 7: XLR 7 or Line 7
Input 8: XLR 8 or Line 8
You can also link inputs into stereo pairs. This affects
hardware monitoring controls in the Outputs &
Monitoring tab (see below).
Using Inputs 1 & 2 with the POD Farm 2 Standalone application
The POD Farm 2 standalone application works with the UX8 driver to provide ultra-low latency via
ToneDirect monitoring for Inputs 1 & 2 of the UX8, which includes two high-Z Instrument inputs,
two XLR inputs, two Line level inputs and stereo S/PDIF input. The UX8 ToneDirect™ Monitoring is
ideally suited for recording guitar and bass with amp and effects processing, providing the instantaneous
feel necessary for competent performance while tracking.
ASIO
®
Record Sends
This box displays the ASIO names of the UX8 input sources as they appear in recording applications
utilizing the UX8 ASIO driver, along with a description of what each Send is carrying. UX8 Input
Sources 1 through 8 are mapped directly to the corresponding Send number (i.e. - Inputs 1-2 are fed to
Record Send 1-2). Sends 9-10 and 11-12 will carry a different signal depending on if the POD Farm 2
standalone application is running.
If the POD Farm 2 standalone application is not currently running, then you’ll see the list appear as
follows:
When POD Farm 2 standalone is not running, Sends
9-10 and 11-12 carry the Input 1 (dry, unprocessed)
signal