Owner's Manual

POD Farm 2 Advanced User Guide – Driver Panel & Recording

3•14

5c – Audio Input:

• In the top selector, you will be able to choose the Record Send for your Line 6 device to view its

format settings below.

• The Format selectors show you the Sample Rate* and Bit Depth that the Line 6 device is

operating at for recording. The Bit Depth for all Line 6 devices is xed at 24 bit.

5d – Volume sliders (audio input):

These sliders are not functional with Line 6 hardware - use the POD Farm 2 standalone Mixer sliders

and/or the Tone’s Volume controls instead of using these sliders to set your Record Send levels for Line

6 devices.

5e – Audio Output:

• The Format selectors show you the Sample Rate* and Bit Depth that the Line 6 device is

operating at for playback. The Bit Depth for all Line 6 devices is xed at 24 bit.

*It is recommended that you do not use the Sample Rate selectors in the Mac® Audio-MIDI

Setup dialog to set your sample rate when your recording software is running. Typically, your

recording software will offer a Sample Rate option within its own “Preferences” or “Audio

Setup” settings. It is best to conﬁgure the Sample Rate within the recording software for your

project, and you will see the device’s sample rate switch automatically to match it.

5f – Volume sliders (audio output):

These sliders are not functional for Line 6 hardware - use the POD Farm 2 standalone application’s

Volume controls (or the Volume knobs on your Line 6 hardware) instead of these sliders to adjust

output levels.