Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•18
• Remove from Library - Removes the selected Preset(s) from the Presets List. Note that this
does not permanently remove the Tone Preset .l6t le from your hard drive, it only makes the
Presets View “ignore” the Preset. Therefore, if you perform a Scan the Preset will re-appear in
the Presets List. If you wish to permanently delete a Tone Preset, you can do so by accessing the
.l6t le using the Mac
®
Finder or Windows
®
Explorer windows, and delete it as you would any
other le from your computer.
Tone Info Dialog
As mentioned above, you can launch the Tone Info dialog via the Tone Info button in the Presets List
Pane, or by a right click (Windows
®
) or Ctrl+click (Mac
®
) on the selected Tone. Here you can enter,
edit and save all kinds of descriptive information with each Tone preset. Choose the options you want
in the elds that include menus, or type in whatever text you like for the non-menu text elds. Be sure
to click OK to retain your changes.
The Tone Info dialog - Info tab (single Tone selected)
TIP: You can configure the Presets View to show any of these Tone Info fields - see page 4•15.
Multiple Mode - If you have two or more Tones selected, the Tone Info dialog launches in “Multiple”
mode, where the checked elds will apply the text to all the selected tones in one action - super cool
for adding useful descriptions to numerous Tone presets all in one shot!