manual

Spider Jam the Amp
2•2
Saving Guitar Tone Presets
Youcanstoreyourcurrentsettingstooneofthe36Userpresetlocationsasfollows:
•Press the Save button.
•Turn the
Select knob to highlight Save Guitar Tone.
•Press
Right on the 4-waybutton.Ifyou’vemodiedaUserpreset,you’llbetakentothatUserpresetlocation.
Ifyou’vemodiedanyotherpreset,you’llgotoUserpresetlocation1A.
•Turn the
SelectknobtoselecttheUserpresetlocationyouwanttostoreto.
•Press
Right on the 4-way button.
•If you want to rename the new preset, use
Left/Right on the 4-way button to pick a character and the Select
knob to change that character.
•Press
Down on the 4-way button to save, or press the Song, Level, or Tone buttons to cancel.
•The settings of all these controls are stored:
Mic/Aux FX Presets
The MicrophoneinputhasitsownFX.Ifyou’vechosentomixtheAux input with the Microphone input, the
Auxinputwillsharethisprocessing,too.ToselectapresetfortheseFX:
•Press the
Tone / Settings button twice to show this display:
•Turn the Select knob to select from the presets.
Aux Input Assign
The Auxinputcanbeusedforasecondguitaroranyotheraudiosource.ThisinputcaneithersharetheAmp
andFXprocessingwiththe
Guitar input, or share the Microphoneinput’sEQ,Reverb,DelayandCompressor
FX.Yougettodecide.Ifyou’reconnectingasecondguitar,you’llwanttosharetheGuitarprocessing.Forjust
abouteverythingelse,you’llwanttosharetheMicrophoneprocessing.Here’showyoumakethatchoice:
•Holdthe
Record Select button for two seconds.
•Turn the
Select knob to select Mixed with Microphone or Mixed with Guitar.
•Press the
Song / Drums, Level / Inputs or Tone/Settings button to exit.