manual

Spider Jam the Amp
2•5
Mic/Aux Delay And Reverb
Ifyou’dliketocustomizetheMic/AuxDelayandReverb:
•Press the Tone / Settings button three times to show additional functions.
•Turn the
Select knob to highlight Mic/Aux Delay And Reverb.
•Press
Right on the 4-way button.
•Press
Left/Right on the 4-way button to select Reverb, Delay, or Delay Time.
•Turn the
Select knob to adjust the Reverb level, Delay level, or Delay Time.
Mic/Aux Compressor
The Compressor will help even out your performance by reducing the volume of the loudest sounds to better
match the volume of the quieter sounds.
•Press the
Tone / Settings button three times to show additional functions.
•Turn the
Select knob to highlight Mic/Aux Compressor.
•Press
Right on the 4-way button.
•Press
Left/Right on the 4-way button to select between Threshold (at what level should the compressor start
working?),Ratio(howaggressiveshouldthecompressorbewhenitstartsworking?)andLevel (turn it up if
the compressor ends up lowering your volume too much).
•Turn the
Select knob to adjust the selected parameter.
Factory Reset
Ifyou’dliketoresetyourSpiderJamtoitsfactory-freshstate,discardingallyourownadjustmentstotheUser
presetsandrestoringthefactory-standardsettings,dothefollowing:
•Power up while holding the
Tone / Settings button.
•
Warning: a Factory Reset will replace all your customized User presets with the factory-standard settings.
So before doing a reset, be sure to back up any custom presets you’d like to save.