manual
Controls & Connections
2
9. Smart Control FX – Spin one of these knobs to
getgreatFX,fastandeasy:
Knob AselectsChorus/Flange,PhaserorTremolo,
witharange of settingsforeacheffect. The LED
shows the active effect.
Knob B selects Delay, Tape Echo or Sweep echo,
with a range of mix settings from low to high. The
LED indicates the active effect. To change the
delay time, tap the
Tap button.
Whenyouturneitherknob,theDisplay will briefly
show you the current settings. Turning a knob all
the way down turns its effect off.
10. Reverb –Dialupmoreorlessvirtualroom.While
turning the knob, the
Display will show you the
current setting.
11. Master Volume – You can choose the overall
volume of the amplier, without affecting your
tone. The current setting is briefly shown in the
Display when you turn this knob.
12. Tap / Hold for Tuner – Tap on the Tap button a
few times to set the delay time. The
Display will
brieyshowthedelaytimeyoutappedinBPM.
Holdthe
Tapbuttonfor3secondstoactivatethe
built-inchromatictuner.
13. FBV Pedal – See Appendix B for more info.
14. Phones – To listen with headphones, plug in here.
The speakers are muted when this jack is in use.
15. Power Switch – Flip the switch to bring Spider
Jam to life.
16. Display – The LCD (
liquid crystal display) is
yourwindowintothepowerofSpiderJam.Here,
you’llseevarious“pages”asyouworkthecontrols.