® StageSource L2t / L2m Pilot’s Guide Guide de pilotage Pilotenhandbuch Pilotenhandboek Manual del Piloto 取扱説明書 40-00-0338 Pilot’s Handbook available @ www.line6.
Important Safety Instructions C AU T IO N R ISK O F E LE C TR IC SH O C K DO NOT O PE N WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules.
You should read these Important Safety Instructions. Keep these instructions in a safe place • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Welcome! StageSource L2t / L2m Speaker For the solo performer or duo, the StageSource L2t is a simple, powerful, and compact integrated live sound solution.
StageSource L2t / L2m Height 23-3/4” / 603 mm Width 12-1/4” / 312 mm Depth 12-1/4” / 312 mm Weight 39.1 lbs / 17.
L2t / L2m Callouts 1. LED – The front-panel LED glows white when the speaker is powered, flashes red when the limiter circuit is active, and glows blue when receiving communication from StageScape M20d. 2. Logo – The Line 6 logo badge can be rotated 90°. Gently pull outward, rotate to match the desired orientation, and snap back into place. 3. Handle – This robust carrying handle doubles as a stand, allowing the L2t/L2m to be angled upwards at 30° (see illustration, below left). 4.
StageSource L2t
L2t Side Panel 1. Input Jack – Connect microphones or line-level equipment to the combi (XLR or 1/4-inch) inputs. The 1/4-inch input can accept unbalanced (Tip-Sleeve) or balanced (Tip-Ring-Sleeve) cables. When connecting an acoustic guitar, use Channel 1. 2. Pad Switch – If the input source is particularly loud, enable the -20 dB pad switch. 3. Channel Gain – Controls the input level for each channel.
StageSource L2t / L2m
L2t / L2m Back Panel 10. Line Input – Connect the line-level output of your mixer to the combi (XLR or 1/4-inch) Line input. The 1/4-inch input can accept unbalanced (Tip-Sleeve) or balanced (Tip-Ring-Sleeve) cables. The Signal LED lights green when a signal is present and may flash red if the input is clipped. 11. L&R Aux Inputs – These L&R stereo RCA jacks are for connecting the audio output of a DJ mixer, MP3 player, or CD/DVD player.
L3s sub with one L2t speaker (on stage) L3s sub with one L2t speaker (on floor or low stage) Use one short speaker pole (not included) Use one long speaker pole (not included); never use any pole longer than 24-3/4” (626 mm) in this configuration L3s sub with two L2t speakers Use two short speaker poles (not included); never use any pole longer than 27-1/2” (700 mm) in this configuration; angle the L2t speakers in the direction of the arrows routed into the L3s’s side panel
About L6 LINKTM L6 LINK is a proprietary digital networking protocol developed by Line 6 to enable easy, reliable, one-cable connectivity between various Line 6 products. Up to nine StageSource speakers (L2t, L2m, L3t, and L3m) and nine L3s subwoofers can be connected via L6 LINK, and channel assignment is automatic, with the first speaker in the chain (master) providing the digital audio channels distributed to all other speakers in the network.
Suspending the L2t / L2m The L2t and L2m provide four threaded M10 attachment points for suspension and one threaded M10 attachment point for pull-back and aiming the speaker. These are designed to allow for suspending the loudspeaker only by a qualified professional familiar with safe rigging practices. Improper installation may result in damage to the speaker or support structure, or injury or death.
Traditional Applications AUX INPUT L/R INPUT CHANNEL 1 Solo Artist INPUT CHANNEL 2 L2t can provide portable amplification for singer-songwriters, complete with EQ, reverb and modulation for each channel. Connect your acoustic guitar to the side panel Channel 1, which features Acoustic Modeling. Connect your microphone to the side panel Channel 2. Connect a portable media player, CD player, or DJ mixer to the rear panel Aux L/R inputs for backing accompaniment or intermission music.
Applications with L6 LINKTM AUX INPUT L/R INPUT CHANNEL 1 Small Club Duet L6 LINK provides an easy way for two artists—each with an L2t—to blend their signals together without the need for an external mixer. Connect the guitars to each speaker’s Channel 1, which features Acoustic Modeling. Connect the microphones to Channel 2.
Small PA with Subs When using a traditional mixer with one or more L2t/L2m speakers and one or more L3s subs connected via L6 LINK, connect both the Main Left and Main Right outputs of the mixer to one L3s’s Left and Right inputs. L6 LINK IN L6 LINK IN L6 LINK OUT/THRU L6 LINK OUT/THRU Connect the L3s’s L6 LINK Out/Thru to an L2t or L2m you wish to designate as left. Continue daisy-chaining speakers via L6 LINK.
Large PA with Subs and L2m Monitors When using a traditional mixer with one or more L3/L2 speakers and one or more L3s subs connected via L6 LINK, connect both the Main Left and Main Right outputs of the mixer to one L2 or L3s’s Left and Right inputs. Continue daisy-chaining speakers via L6 LINK. Any L3 subs and speakers will automatically configure themselves as left, right, or mono (left + right), according to the table on page 12.
StageScape M20d—Small PA Connect the L6 LINK out from a StageScape M20d mixer to the rear panel L6 LINK In on any speaker in the network. Any L2t/L2m speakers and L3s subs on an L6 LINK network are numbered independently. In this illustration, the two L3s subs (labeled SUB 1 and 2) will, by default, play left and right, respectively. The two upright L2t/ L2m speakers (numbered 1 and 3) will, by default, play left and right, respectively.
StageScape M20d—Large PA In the illustration below, four L3s subs (labeled SUB 1-4), four L3t/L3m speakers, and three L2t/L2m speakers (independently numbered 1-7) are daisychained from an M20d mixer. The subs and upright speakers automatically configure themselves to be a powerful stereo mains system. L2t/L2m speakers on their side (numbers 3, 4, and 5) automatically configure themselves as stage monitors, and play monitor feed A, B, and C respectively.
