Quick Start Manual

Thank you for your purchase of the XD-V35 wireless microphone system. It is a high quality digital

wireless system, in a simple format that is virtually plug-and-play. With its fully digital transmission,

the system provides features and beneﬁts that differ in some ways from previous generations of analog

wireless, but in most respects you use it just like other wireless systems. By understanding a few simple

concepts, you’ll be able to achieve superior audio quality, a secure and dropout-free signal, and the

ability to use multiple channels of wireless together without interference or other conﬂicts.

•Digital transmission in the 2.4 GHz band – license-free operation worldwide

•Avoids interference from high-power TV transmitters in the UHF bands

•Digital technology provides the audio response of a cable, without companding – 24-bit digital

converters, 118 dBA dynamic range, and 10 Hz – 20 kHz bandwidth

•System latency < 3.5 ms

•Proprietary two-frequency transmission promotes reliable, dropout-free performance

•Compatible with existing WiFi installations

•Fast setup: gain, squelch, or level adjustments not required

•6 channels that work together simultaneously

•275 foot (83 meter) range

•Transmitter life > 8 hours on two AA alkaline batteries

•Battery level and RF LED meters

•Table top receiver with internal antenna

•XLR and ¼" TRS output connectors

•Designed for compatibility with previous XD-V30 systems

Recommendations foR Best PeRfoRmance

•Maintain a clear line of sight between the transmitter and receiver’s internal antennas.

Typically the receiver should be placed at table top or higher level. Avoid placing the receiver

in the bottom of the rack or behind walls and obstructions.

•When transmitters are used at a greater distance, place receivers closer to them and use XLR

mic (or ¼") cables to connect to the audio system.

•Avoid placing the receiver in close proximity to RF generating equipment including computers,

wireless access points, in ear monitor transmitters and microwave ovens.

•Avoid blocking antennas in the transmitters. Do not “cup” the bottom of the handheld

transmitter. Avoid placing the bodypack transmitter in pockets.

suPPlied comPonents

XD-V35 Receiver: receiver; 9V / 0.5A external universal power supply; user’s manual.

THH06 Handheld Microphone: transmitter; two (2) AA alkaline batteries; mic stand clip.

TBP06 Bodypack Transmitter: transmitter; two (2) AA alkaline batteries; unidirectional lavalier

microphone with windscreen and clip.