User Manual

Appendix C: MIDI
C•4
Using POD HD Pro/FBV as a MIDI Controller
You can configure any number of your POD HD Pro Presets to include customized MIDI
Control assignments for most FBV footswitches and Pedal controls. This allows you to
use POD HD Pro and FBV to remotely control other hardware or software, such as Line 6
M13, M9, POD® Farm 2 Plug-In, or any other Line 6 or 3rd party products that respond
to external MIDI control!
Note: Please refer to “FBV Controller Devices - Footswitch & Pedal Mapping” on page
B•5
the see how your specific FBV device’s switches & pedals are mapped to the various
POD HD Pro assignable controllers (FS 1-8, EXP 1, EXP 2, TOE SWITCH, etc.)
The MIDI ASSIGN Screen
The MIDI ASSIGN screen is where you configure custom MIDI commands. To access
the MIDI ASSIGN screen, start on the Home View page and press and hold the MOVE
button. All settings in this screen are saved per Preset.
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
Press and hold the MOVE button to display the MIDI ASSIGN screen
Use the and Nav. Disc buttons to select the desired FBV footswitch or Exp Pedal
control. The selected control is indicated by the down arrow (such as FS2 in the above
screen). Once selected, the control’s MIDI options can be edited using the Multi-function
Knobs 1-4. Each respective control in the screen indicates if it has an active MIDI
assignment:
FS1 with MIDI Assignment FS1 with no MIDI Assignment