User Manual

System Setup
2•8
Page 6, MIDI/Tempo Options
• MIDI Channel (Knob 1): Sets the “System” MIDI Channel that POD HD Pro
utilizes for both receiving and sending MIDI communication via the MIDI DIN
Input/Output. Choose any individual Channel 1 - 16, or “Omni” for all Channels.*
This is a global setting.
*Note: The MIDI Channel selected here also affects the MIDI Channel settings utilized by
L6 LINK - see “Page9,Setup:L6LINKControl”onpage2•11.
• MIDI Out/Thru (Knob 2): Allows the MIDI Out DIN to be switched between a
MIDI Output versus MIDI Output + Thru.
• Tempo Sync (Knob 3): The “Speed” or “Time” parameters of all tempo-based FX
(Modulation, Pitch & Delays) can optionally be set to a note value to follow the
(Knob 4) Tempo BPM value. This Tempo Sync option is a global setting that allows
you to choose whether the FX follow the Tap Tempo as a per-Preset value or globally.
• Preset: Tempo settings are saved and recalled on a per Preset basis.
• Global: Tempo information stored within any Preset is ignored. When saving a
Preset while this option is set to “Global,” the current tempo value will be saved
with the Preset.
• Tempo (Knob 4): Enter in a specific “Tap Tempo” for your current Preset (as opposed
to pressing rhythmically on the TAP button). This value is saved individually per
Preset.