User Manual

Set Lists & Presets
4•3
Arranging Presets within Set Lists
While in the Set Lists screen, double-press the ENTER button to display the list of Presets
in the current Set List, where you can reference each Preset’s Bank/Channel location, load
a Preset, or rearrange the Presets into in any order you like.
The Set List - Presets screen
Load a Preset: Use the Nav. Pad buttons, or turn the PRESETS knob to select any
of the 64 locations, or use the Nav. Pad buttons to navigate through the list one
Bank at a time. Press the ENTER button to immediately load the selected location’s
Preset.
Move a Preset: Here is an example where we’ll move the “HIWAY 100” Preset from
location 2A to location 2C.
• Select location 2A for the “HIWAY 100” Preset, then press the MOVE button.
You’ll see the selected Preset appear “raised” to indicate it is now moveable:
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF