User Manual

FX Edit Mode
5•2
Use the Multi-Function Knobs 1- 4 to access the respectively numbered options at the
bottom of the Edit Mode screen.
The Multi-Function Knobs
While the Edit Mode screen is displayed, these knobs access the following functions.
Knob 1 - Type
Select the type of FX Model you want to insert into this Block location. You’ll see the
selected Type displayed at the top of the screen, as well as a handy Model On/Off indicator
at the right.
• None: Choose “None” to remove any FX Model from the Block.
• FX: Choose from the list of FX types.
• FX Loop: Not technically an FX Model, but the device’s FX Loop can be inserted
and its options edited much like one! See “FX Loop” on page 5•4.
Knob 2 - Model
Choose the specific Model for the current FX Type. You’ll see the selected FX Model
displayed at the top of the screen.