User Manual

Amp, Cab & Mic Models
6•4
Amp and Preamp Models
We’ve included a complete set of “Preamp” versions of each Amp as well. Choose one
of these to obtain the tone of just the preamp stage of the amp - recommended when
feeding your POD HD Pro output into an external amplifier,orwhenusingtheL6LINK™
connection.*
A Preamp Model is selected for Amp B
*Note that, whether an Amp or Preamp is selected, the additional application of Cab and
Mic Models is dependent upon the SETUP:OUTPUT settings. Please see “Page 4, Setup:
Output Options” on page 2•5
.
The overall volume levels among the different Preamp Models varies - this is normal. The
Preamp sections of each of the classic amplifiers we modeled are indeed quite different,
and we’ve set the Preamps’ default values to best match the type of power amp into which
they are intended to feed. Tweak the DRIVE and VOLUME knobs to optimize the level
for your specific needs!
Amp Block States
The Amp Blocks have 3 available states: On, Off (bypassed) or Disabled (sometimes
referred to as a “Null” state for the Block).
Amp Block “On” Amp Block “Off” Amp Block “Disabled” (Null Block)