User Manual

Amp, Cab & Mic Models
6•5
About Default Amp Settings
Whenever you change to a different Amp or Preamp Model, predetermined Cab &
Mic models are automatically loaded, as well as Amp Tone Knob settings, designed to
complement the Amp type. As noted throughout this chapter, you can certainly switch to
a different Cab and/or Mic Model - just be sure to save your Preset to retain these changes.
Mic Models
The8selectableMicModelsforeachAmpareasfollows.
Mic Model Descriptions
Mic Name
Based On...
*
57 On Xs
Shure® SM57 Dynamic, On Axis
57 Off Xs
Shure® SM57 Dynamic, Off Axis
409 Dyn
Sennheiser® MD 409 Dynamic
421 Dyn
Sennheiser® MD 421 Dynamic
4038 Rbn Coles 4038 Ribbon
121 Rbn
Royer® 121 Ribbon
67 Cond
Neumann® U 67 Condenser
87 Cond
Neumann® U 87 Condenser
Editing Amp Parameters
To toggle the selected Amp model On or Off
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
Press the ENTER - AMP ON/OFF button once. Toggling the Amp “Off” results
in bypassing the Amp, Cab and Mic processing.
*
All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Shure® is a registered trademark of Shure Incorporated, Sennheiser® is a registered trademark of Sennheiser Electronic Corporation, Neumann® is a registered trademark of Georg Neumann GMBH, Royer® is a registered
trademark of Bulldog Audio, Inc. DBA Rover Labs