User Manual

Amp, Cab & Mic Models
6•7
• With both Amp Models On: You’ll see the screen’s respective controls update as
you adjust the Amp Tone knobs, as shown above. Note that the black “dots” around
each knob indicate its last-saved value. You can also still access the Amp, Cab &
Mic Model and Amp A/B selections via the Multi-function Knobs 1-4 while this
screen is displayed.
Page 1 of the Amp:Edit Screen - Amp A Bypassed
• With an Amp Model Off: You’ll see only a VOL knob, as shown above for Amp A.
This is a separate parameter strictly for the Amp Model’s Bypass Volume. Use the
VOLUME knob on your device to adjust this, and its value is stored separately with
the Preset for whenever the Amp Block is Bypassed.
Note that the VOLUME knob does not control the level at all for a “Null” Amp Block.
• Use the Multi-Function knobs 1 - 4 to adjust the options at the bottom of the screen:
• Knob 1: Select the desired Amp or Preamp Model.
• Knob 2: Select the desired Cab Model (also see the Page 4 options).
• Knob 3: Select the desired Mic Model (also see the Page 4 options).
• Knob 4: Choose between adjusting controls for Amp A or Amp B. (This option
is available on all AMP EDIT screens.)