User Manual

FX Models
7•11
• Fdbk (Feedback): Sets the number of delayed repeats.
• Depth: Some delays include modulation. These will typically include a Depth
parameter to adjust the intensity of the pitch modulation applied to the repeats.
• ModSpd: Control the speed of the pitch modulation.
• Mix: Sets the balance of the “Dry” and “Wet” signals. At 0% no effect is added to
your signal; at 100% you will hear the delayed signal only.
Reverb Models
Reverb Models - Parameter Reference Table
Model Parameters
Plate Decay PreDelay Tone Mix
Room Decay PreDelay Tone Mix
Chamber Decay PreDelay Tone Mix
Hall Decay PreDelay Tone Mix
Echo Decay PreDelay Tone Mix
Tile Decay PreDelay Tone Mix
Cave Decay PreDelay Tone Mix
Ducking Decay PreDelay Tone Mix
Octo Decay PreDelay Tone Mix
Spring Decay PreDelay Tone Mix
‘63 Spring Decay PreDelay Tone Mix
Particle Verb Dwell Condition Gain Mix
Common Parameters
The following parameters are common to all Reverb Models, with the exception of the
Particle Verb Model, which we’ve described separately.
• Decay: Sets the length of time the reverb effect sustains.
• Predelay: Configures the time before the reverb effect is heard.