User Manual

USB Audio
9•7
*Note: The Audio MIDI Setup utility window within Mac OS® X versions 10.6 and later
has a slightly different layout, but offers the same options and functionality as described
here.
A
System Settings:
• The Default Input and Default Output options allow you to choose the audio
interface you want your Mac® audio applications to use by default. If you want this
to be your Line 6 device, select it here.
• The System Output option allows you to choose which audio interface the Mac
®
System sounds are played through.
B
Device Properties: Choose your POD HD Pro device here to allow the Audio Input
and Audio Output options display its settings.
C
Audio Input & Output Options: If you’ve selected your POD HD Pro in the Device
Properties, these settings will all refer to your POD HD Pro device:
• You’ll see the Input and Output selectors both disabled, showing Master Stream for
each. POD HD Pro includes one stereo “xed” Input (Record Send 1-2) and one
xed stereo Output (Out 1-2).
• The Source options are also disabled for POD HD Pro.
• The Format selectors show you the Sample Rate* and Bit Depth that POD HD Pro
is operating at for recording. The Bit Depth for POD HD Pro is fixed at 24 bit.
*It is recommended that you do not use the Sample Rate selectors in this window to set the
sample rate when your audio software is running. Typically, your audio software will offer a
sample rate option within its own “Preferences” settings.
• The Input Volume Sliders offer level control for the Record Send signal fed to your
recording software.
• The Output Volume Sliders offer stereo level control for your software’s audio
playback fed to POD HD Pro.