User Manual

Line 6 GearBox 3.6 – Glossary (What Is...?)
10•7
Tone Library - Download hundreds of custom and Artist created Tones for free!
There are three controls at the top left of the Browser:
BACK – Steps back through the items that the browser has displayed.
FWD – After clicking the BACK button, you can click the FWD button to step forward again
through the items that the browser has displayed. The button will replaced by an outline if you
have not used the BACK button yet, or you have forwarded to the last item displayed by the
Browser.
Show/Hide Browser – The arrow button at the left shows/hides the Browser.
p Return to What Is Topics
What is the Bypass button?
The Bypass button will bypass ALL the GearBox processing of your input signal. The monitor signal
you hear will then be rather “naked”, as well as the signal routed to your Record Sends. Engaging the
Bypass button reduces the CPU load of your computer as well since it turns off all signal processing
tasks. You’ll see the GearBox interface “gray out” to indicate this when the Bypass button is engaged:
[[ Update for POD X3 if changed for release - instead of this bypass button, you can enable/disable
the Amp & Cab processing blocks by clicking on the Amp icon, just like all the other blocks in the
row of FX icons. ]]]
p Return to What Is Topics
•
•
•
•