User Manual

Phones
Connect your stereo headphones here to listen to your
bass and/or your favorite CD and jam along for working
on your favorite licks. Plugging in headphones disables
your speaker output.
Factory Reset of all Presets
You can reset all 36 of your LowDown programmable
channels to their factory-programmed states by holding
down the Channel A button as you turn on the power.
Warning: This will erase ALL custom sounds you might
have created. Ask yourself, “Do I really want to do
this?” If your answer is yes, then go for it!
Using Your Feet
The FBV Shortboard includes all the controls needed
to make your LowDown experience the best possible.
Also available are the FBV Express for channel
switching and Vol/Wah control and FBV2 for channel
scroll. Note that the Line 6 Floor Board and FB4 foot
controllers will not work with LowDown.
FBV foot controllers come with an included RJ-45
cable. Connect this cable between the LowDown and
the side of the FBV. If you ever need a replacement
cable, look for a Category 5, 10 Base-T or RJ-45 cable
with male connectors on both ends. These can be
found at almost any computer supply retailer.
NOTE: Do not use a “cross-over” CAT-5 cable, as it
may send voltage to unintended locations of your FBV
controller and damage the unit.
FBV2
1. Functions as a two button channel scroll foot switch.
This foot switch allows you to scroll through the 4
channels (the A,B,C & D buttons) of your LowDown.