User Manual

Line 6 GearBox 3.6 – GearBox with POD X3
5•17
it’s possible to do all these things by dragging and dropping. For all cases the rules apply that you
can only drag and drop a selected item into a location of the same type - that is, you can only drag
an individual Tone onto a Tone slot, a Channel onto a Channel, or a Bank onto a Bank. It is also
not permitted to drag and drop multi-selected items to other locations in the Hardware Memory
window either.
Swap - If you select an individual Tone, a Channel or a Bank within the Hardware Memory
window and then drag it onto a different individual Tone, Channel or Bank, this will move
the dragged items into the new location. Note that this “swaps” the Tones between the two
locations. For example, if you select Channel 2A and drag and drop it on top of channel 4B,
this results in the 2A tones being moved to 4B, and the Tones previously in 4B are moved
to 2A.
Copy/Paste - If you hold the Ctrl key (Windows) or Command key (Mac) while dragging,
this will make a copy of the selected Tone/Channel/Bank and Paste the selected Tone(s)
into the location you drop them onto. Using the previous Swap example, this would copy
the Tones from Channel 2A into 4B, and the Tones originally in 2A remain in place and
unchanged.
Re-Order - If you drag a selected Channel or Bank onto the dividing line between two
Channels or Banks, the selected data is inserted at the target location, shuffling the other
Channel/Bank data to fill in the location from where the selected came from. For example,
if you select Bank 1 and drag and drop it on the dividing line between Banks 3 and 4, this
results in the data formerly at Bank 1 moved to Bank 3, the data formerly in Bank 2 being
moved to Bank 1, and the data formerly at Bank 3 being moved to Bank 2.
Drag and Drop between Banks 1-16 and 17-31 - Since there are two separate “pages” in the
Hardware Memory window, you might be wondering just how you can drag items from Banks 1-16
over to 17-31, and vice-versa. Well, no worries we’ve got you covered here! Once you click on and
start dragging a selected bank, Channel or Tone, you’ll see a little message pop up next the Bank
toggle buttons. While dragging, just hover over the Bank Toggle buttons and this will switch you to
the other Banks page, thus allowing you to drop your dragged there.
Click and start dragging your
selected Bank, Channel or Tone...
When you see the “Drag here...” message appear,
just drag over the Bank buttons to switch to the
other Banks page.
Editing a Tone
You can select any Channel in the Hardware Window and hit ENTER on your keyboard (or just
double-click directly on the Channel’s number) and you will be switched to the GearBox main “Editor”
window where the selected Channel’s Tones are loaded for you (note that the Channel may include
one Tone or two, depending on how it was configured). This of course allows you to hear the Tones
and edit & Save as desired. A little speaker icon is displayed at the left of the Channel within the
Hardware Memory window to indicate which is currently loaded in the GearBox editor - for example,
•
•
•