User Manual

4 5

Top Panel Controls

5 6 7 8

9 1132

1. CHANNEL SELECT – Press either the CH A or CH B button to

select the channel you want to congure.

• Optionally, press MANUAL to enter Manual mode and use the

knobs like a traditional amp.

• Make any changes you like to the amp knob settings, eects, etc.,

and optionally save your changes—see "How To:" on page 8.

2. GUITAR INPUT – Plug your guitar in here.

3. AMP SELECTOR – Use this encoder knob to select from the Line

6 Original Amp Design Voicings.

AMP TYPE VOICING NAME DESCRIPTION

Clean CLARITY Pristine clean, even when cranked

Boutique ARISTOCRAT Inspired by iconic, hand-crafted tones

Chime CARILLON Classic chime, only bigger and deeper

Crunch VOLTAGE Crunchy, with a British accent

Dynamic KINETIC Highly touch-responsive, mid-gain tone

Hi Gain OBLIVION Contemporary hi-gain, with extended lows

4. BOOST SWITCH & KNOB – Press the switch to enable/disable the

Boost feature, which is built-in to each Amp Voicing and optimized

for superior sound. Use the knob to adjust the Boost level.

5. GAIN – Controls how much distortion you get in your tone.

6. BASS, MID, TREBLE – Allow you to adjust the overall EQ for each

preset that you store. When in “MANUAL” mode, these knobs

operate just like those on a traditional amp.

7. PRESENCE – Typically found on tube ampliers, this boosts

specic upper midrange and treble frequencies to make your tone

more pronounced and “present” in a mix.

8. CH VOL – Controls the preset's channel volume and is the primary

way to adjust and match the volume level of your presets.

9. EFFECT SWITCH & KNOB – Pressing the button scrolls through

the separate eect types (Delay, Modulation, Pitch/Filter). Press

again to switch the eects O—see "How To:" on page 8.

When an eect is engaged, the knob blends the "wet" eect level

into your signal.

10. TAP/TUNER BUTTON – Tap in time with the music to set the

tempo of delay and modulation eects. Press and hold to engage

the Tuner. Press again to exit.

11. REVERB SWITCH & KNOB – Press to enable the on-board digital

reverb—see "Bypass/Enable REVERB" on page 9. When

enabled, the knob controls the level of ambience, atmosphere, and

space for your tone.

12. MASTER VOLUME – Controls the overall volume of the amplier

as well as headphone output (when in use).