User Manual

41
PLATE
A Line 6 original.
As described for the "PLATEAUX" model, plate reverbs are regarded as the most smooth and versatile types around. Use the REPEATS (for decay) and
MIX to add a little or a lot as needed to burnish just about any type of signal.
TWEAK sets Predelay from 0 to 200 milliseconds.
GANYMEDE
A Line 6 original.
Yet another fine plate-style reverb. This one goes deeper than the Plate model above, with added richness and modulation on tap to really expand your
senses. Essentially, the Ganymede is very similar to the "PLATEAUX" model, but without pitch shifting enhancements.
TWEAK sets Modulation Depth from 0% to 100%.
CHAMBER
A Line 6 original.
In the golden days of R&B and early Rock & Roll, studios often utilized a specially built, reflective chamber to pump music into, which was then re-miked
to capture and add ambience to those classic hits. This model has a slightly warmer texture than other early reverbs and adds a nice retro vibe.
TWEAK sets Predelay from 0 to 200 milliseconds.
HOT SPRINGS
A Line 6 original.
Spring reverbs units were one of the early portable and cost-effective solutions for integrating reverb into those great old tube guitar amps, like your
daddy-o has in the basement. They offer a bright, bouncy character that was heavily used in the rockabilly and surf guitar genres, as well as other vintage styles. Our Hot Springs
reverb is a bigger and badder incarnation, where you can use the TWEAK knob put up to 3 spring units into action for greater depth.
TWEAK sets the number of Springs in use, from 1 to 3 (and any fractional amount in between).
HALL
A Line 6 original.
This one emulates a large concert hall environment, for when only that grandiose, classical character will do. Turn up the REPEATS knob to see how huge
you can make it.
TWEAK sets Predelay from 0 to 200 milliseconds.