User Manual
Table Of Contents
- DL4 MkII Owner's Manual
- Welcome to DL4 MkII
- Quick Start
- Basic Operation
- Working with Presets
- Loading Presets A, B, and C
- Loading Presets D, E, and F
- Loading Presets 1 - 128 via MIDI
- Saving a Preset
- Restoring Factory Presets
- About Tap Tempo
- Configuring Delay and Reverb Routing
- Stereo vs. Mono Output
- Setting up an Expression Pedal and Footswitches
- Configuring One or More Parameters for Pedal Control
- Configuring Footswitch Control Options
- Controlling The Classic Looper Parameters
- Using a Microphone
- Using the Looper
- Effects Models
- Global Settings
- MIDI
- Additional Resources
43
Global Settings
The DL4 MkII Global Settings include parameters that apply to all presets, such as
input and output levels, pedal and footswitch behaviors, MIDI options, and more. It’s a
good idea to review these options listed here since they allow you to customize many
aspects of the device to work best for your particular setup.
Accessing the Global Settings
To enter the Global Settings mode on your device, use the following steps:
1.
Press and hold the ALT/LEGACY button, press the TAP footswitch,
and then release both.
+
You’ll see all footswitch LEDs go dark and the ALT/LEGACY button’s LED lit with a
color other than green to indicate you have entered the Global Settings. Note that the
ALT/LEGACY button’s LED color is an important indicator for referencing your selected
options, as you’ll see in the following steps.
2.
Referring to the Global Settings table on the next page, turn the
device’s Selector knob to choose the specific Global option you wish
to configure.
For example, as documented within the "Global Settings Table" on page 44:
To configure the Tempo Preset/Global option, turn the Selector knob to VINTAGE
DIGITAL/DIGITAL. Or...
To configure the TAP Footswitch Assign, turn the Selector knob to CRISSCROSS/
DIGITAL w/MOD, etc.
3. Consult the table once again, this time referring to the "Values - ALT/
LEGACY LED Color" column for the Global Setting you selected in the
previous step. Push and release the ALT/LEGACY button repeatedly to
cycle through the colored LED options to choose the one you prefer.
For example, if you’ve selected the Tempo Preset/Global setting in the previous
step, you have two choices: Per Preset (indicated by a red colored LED ) or
Global (indicated by a white colored LED ).
For this Tempo Preset/Global setting, the button’s LED is initially lit red, since Per
Preset is the factory default.* If you want to keep this default setting, keep the ALT/
LEGACY button set to red. To change to Global, press the button to where it is lit white.
*NOTE: Within the Global Settings table, the factory default option is indicated for each
setting with the symbol.
As you can see in the table, some Global Settings have several options, for which each
will be indicated by one of five different LED colors: red , white , blue ,
orange , or yellow ).
4. Repeat steps 2 and 3 to configure any additional Global Settings.
5. Once you’ve made all the desired changes, press any footswitch to
exit Global Settings and your changes are automatically retained.
You can repeat these steps anytime to edit your Global Settings.